MBF2113C-8-150 Blind Rivet

Identification Code Color
The application of color or a series of colors for the expressed purpose of identifying the specific functional design and/or the system application of an item.

gray

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.2575in. and 0.2595in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

threaded SELF-Plugging shank w/sleeve

Head Major Diameter

0.463in. and 0.507in.

Expansion Device
The device by which the item is expanded and set.

threaded stem and expander

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol or carbo wax or paraffin wax

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.100in. and 0.150in.

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

drive nut

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

2100 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

7900 double pounds per square inch

Countersink Angle
The included angle of the countersink.

129.0 degrees and 131.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

powder blast top of head.

Heat Treatment
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

annealed sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 bolt

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 304 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

titanium alloy uns R56400 nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS5639 assn std single material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS5731 assn std single material response bolt or AMS5732 assn std single material response bolt or AMS5737 assn std single material response bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-T-9047 mil spec single material response nut or AMS4928 assn std single material response nut or AMS4967 assn std single material response nut

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate bolt

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

phosphate nut

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

ps 741, cage 92215 mfr ref single treatment response nut

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response bolt

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response sleeve

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

98524-MBF2113 manufacturers standard

MBF2113C-8-150

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. MBF2113C-8-150 specification

Answers.

NSN 5320-01-411-9035 RIVET,BLIND

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

Availability for MBF2113C-8-150 A member of our team will provide you with a price and availability quote

Shipping Information

Similar by Design Other rivets with similar characteristics

MBF2113C-8-150 / Rivet,blindWhat is the formal definition of this item?