Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HS6048-5-01 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.140in. and 1.497in. ⁓1-1/2"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
countersunk w/protruding stud
A measurement from the bottom to the top of the head,in distinction from depth.
0.067in. ⁓5/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.173in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging mechanically locked stem
0.312in.
The national stock number or the identification information of the end equipment for which the item is a part.
1520-01-355-8250, helicopter, attack
A measurement of the longest dimension of the grip,in distinction from width.
0.397in. and 1.067in.
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
rivet, blind, protruding head, 1/64 oversizw
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 5056 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1038 grip
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1050 washer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8740 threads
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 mil spec 1st material response sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium washer
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromate sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium grip
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-5541 class 3 clear mil spec 1st treatment response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 ty ii class 2 clear fed spec single treatment response grip
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416 ty ii. class 2 clear fed spec single treatment response threads
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
additional washer material is steel 1075 or 1095; threads material is govened by ams 6322
The document designator of the specification or standard which established the item of supply.
MIL-R-7885 government specification
Answers.
1EA
Steel comp 8740 threads
Steel comp 1050 washer
Steel comp 1038 grip
Aluminum alloy 5056 sleeve
0.397 inches minimum and 1.067 inches maximum
Countersunk w/protruding stud
Right-hand
FSC 5320 ⁓ Rivets
NSN 5320-01-552-5122 RIVET,BLIND
Used on 1520-01-355-8250, helicopter, attack. cadmium stem surface treated rivet, blind, protruding head, 1/64 oversizw 0.397" grip length countersunk w/protruding stud head style right-hand
- NIIN
- 015525122
- NIIN Date
- 06/15/07
- Schedule B
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- 40
- QUP
- 1
- Historical Price
- $14.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Defense Logistics Agency
Availability for HS6048-5-01 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HS6048-5-01 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
