Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. HS5893S04-03U specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.323in. ⁓21/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.124in. and 0.128in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging mechanically locked stem
0.188in. and 0.196in.
The national stock number or the identification information of the end equipment for which the item is a part.
1520-01-617-0928
A measurement of the longest dimension of the grip,in distinction from width.
0.126in. and 0.187in.
The included angle of the countersink.
98.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 stem
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 400 or nickel alloy R-405 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 400 or nickel alloy R-405 or iron alloy 660 locking ring
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate stem
Answers.
Nickel alloy 400 or nickel alloy r-405 or iron alloy 660 locking ring
Nickel alloy 400 or nickel alloy r-405 sleeve
Iron alloy 660 stem
0.126 inches minimum and 0.187 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
FSC 5320 ⁓ Rivets
NSN 5320-01-626-0060 RIVET,BLIND
Used on 1520-01-617-0928. passivate stem surface treated 0.126" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 016260060
- NIIN Date
- 02/24/14
- Schedule B
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
- - Singapore
- - Republic of Korea
Availability for HS5893S04-03U A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
HS5893S04-03U / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
