F0200-8

F02008 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. F0200-8 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.588in. and 0.618in. ⁓5/8"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.213in. and 0.215in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

threaded SELF-Plugging shank w/sleeve

Head Major Diameter

0.378in. and 0.385in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

dry film or wax

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.469in. and 0.531in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

180000 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

5240 double pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303f sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4130 stem or steel comp 8740 stem or steel comp 4140 stem

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 4130 body or steel comp 8740 body or steel comp 4140 body

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5641 assn std single material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6758 mil spec 1st material response body or MIL-S-6049 mil spec 2nd material response body or MIL-S-5626 mil spec 3rd material response body

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6758 mil spec 1st material response stem or MIL-S-6049 mil spec 2nd material response stem or MIL-S-5626 mil spec 3rd material response stem

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium body

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, TY2, CL3 fed spec single treatment response sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, TY2, CL3 fed spec single treatment response stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, TY2, CL3 fed spec single treatment response body

Answers.

What material is the blind rivet made of ?

Steel comp 4130 body or steel comp 8740 body or steel comp 4140 body

What material is the blind rivet made of ?

Steel comp 4130 stem or steel comp 8740 stem or steel comp 4140 stem

What material is the blind rivet made of ?

Steel comp 303f sleeve

What is the shear strength?

5240 double pounds per square inch

What is the grip length?

0.469 inches minimum and 0.531 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for F0200-8?

5320-00-814-8553

How is this classified for shipping?

Schedule B number: 7318230000
Rivets of iron or steel

What's the federal classification of F0200-8?

FSC 5320 ⁓ Rivets

NSN 5320-00-814-8553 RIVET,BLIND

cadmium stem surface treated 5240 double pounds per square inch shear strength 0.469" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
008148553
NIIN Date
09/02/97
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. FF0200-8 Cage 92541

Major End Users Countries and entities

  • - France 
  • - Germany 

Availability for F0200-8 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

F0200-8 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.