CR9178-5-4

CR917854 Blind Rivet

Home » Catalog » Fasteners (p. 935) » Blind Rivets (p. 31) » Part Number CR9178-5-4

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Serving our customers with quality and safety first.

AS9120 Certified
Audited supply chain
ITAR Registered
DDTC Registered
HAZMAT Certified
Customer service objectives
Every product 100% inspected

Datasheet. CR9178-5-4 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.317in. ⁓21/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.171in. and 0.175in.

The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

Head Major Diameter

0.282in. and 0.290in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.188in. and 0.250in.

Countersink Angle
The included angle of the countersink.

100.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

serrated stem, self plugging 100 degrees, flush head

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 2117 sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MILA8625 mil spec single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize

Answers.

What material is the blind rivet made of ?

Aluminum alloy 2117 sleeve

What is the grip length?

0.188 inches minimum and 0.250 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for CR9178-5-4?

5320-01-560-5740

What's the federal classification of CR9178-5-4?

FSC 5320 ⁓ Rivets

NSN 5320-01-560-5740 RIVET,BLIND

anodize surface treated serrated stem, self plugging 100 degrees, flush head 0.188" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN: 015605740
NIIN Date: 02/04/08
Schedule B
Name Code: 00864
FIIG: A040A0
DEMIL / ITAR: Uncontrolled item (Code A)
Hazmat: No hazard information available from HMIRS.
MSDS: N/A
Precious Metals: No precious metals
Enviromental: N/A
Electrostatic ESD & EMI: No ESD or EMI sensitivity

Availability for CR9178-5-4 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

CR9178-5-4 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.