Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CR517-5-4 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.193in. ⁓13/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
oval/truss
A measurement from the bottom to the top of the head,in distinction from depth.
0.040in. ⁓3/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.156in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
pull through hollow shank
0.187in.
The device by which the item is expanded and set.
knob STEM-Type k
A measurement of the longest dimension of the grip,in distinction from width.
0.062in. and 0.125in.
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium stem
Answers.
Steel stem
Nickel alloy sleeve
0.062 inches minimum and 0.125 inches maximum
Oval/truss
Schedule B number: 7508900000
nmfc 139820
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5320 ⁓ Rivets
NSN 5320-00-019-5108 RIVET,BLIND
cadmium stem surface treated 0.062" grip length oval/truss head style
- NIIN
- 000195108
- NIIN Date
- 04/25/67
- Schedule B
- 7508900000
- Name Code
- 00864
- FIIG
- A040A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3012519 | Cage 00198 |
Major End Users Countries and entities
- - Malaysia
Availability for CR517-5-4 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 85.0
- LCL (less than a car load rating)
- 70.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 139820 NICKEL BOLTS/NAILS/NUTS/RIVETS ETC
- UFC (universal freight code)
- 70220
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
CR517-5-4 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
