Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CR3552P6-8 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.640in. ⁓41/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.200in. and 0.204in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging mechanically locked stem
0.349in. and 0.357in.
The device by which the item is expanded and set.
plain STEM-Type t
The national stock number or the identification information of the end equipment for which the item is a part.
A-10 aircraft
A measurement of the longest dimension of the grip,in distinction from width.
0.438in. and 0.500in.
The included angle of the countersink.
98.0 degrees and 101.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
aluminum epoxy spray coated
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy R-405 sleeve or nickel alloy K-500 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660 locking ring or steel comp 304 locking ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 632 stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5731 assn std single material response locking ring or ams 5737 assn std single material response locking ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5657 assn std single material response stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-N-281 fed spec single material response sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
aluminum sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate locking ring
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response locking ring
Answers.
1HD
Steel comp 632 stem
Iron alloy 660 locking ring or steel comp 304 locking ring
Nickel alloy r-405 sleeve or nickel alloy k-500 sleeve
0.438 inches minimum and 0.500 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
FSC 5320 ⁓ Rivets
NSN 5320-01-547-5513 RIVET,BLIND
Used on a-10 aircraft. passivate locking ring surface treated aluminum epoxy spray coated 0.438" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 015475513
- NIIN Date
- 01/24/07
- Schedule B
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $287.45 HD
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | NAS9311MN-6-08 | Cage 80205 |
| 2. | NAS9311MP-6-08 | Cage 26512 |
Major End Users Countries and entities
- - Department of The Air Force
- - France
Availability for CR3552P6-8 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
CR3552P6-8 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
