Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CR2162T5-6 specification
The application of color or a series of colors for the expressed purpose of identifying the specific functional design and/or the system application of an item.
orange and yellow
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.513in. ⁓33/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.155in. and 0.159in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
0.282in. and 0.290in.
The device by which the item is expanded and set.
serrated STEM-Type w
A substance designed to provide a reduction of friction between the two surfaces in contact.
dry film
A measurement of the longest dimension of the grip,in distinction from width.
0.313in. and 0.375in.
Those features,not otherwise specified,which may be required for proper functioning of the item.
SELF-Locking
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
375 pounds per square inch
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
755 single pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
H-38 strain hardened locking ring
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
T-4 solution heat treated sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2017 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 5056 locking ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 7075 stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec all material responses
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromate stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 mil spec 1st treatment response sleeve or MIL-C-5541 mil spec 2nd treatment response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-5541 mil spec single treatment response stem
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
similar to NAS1399D5-6 nsn 5320-00-993-7358 except w/ trans lub 20204
Answers.
Aluminum alloy 7075 stem
Aluminum alloy 5056 locking ring
Aluminum alloy 2017 sleeve
755 single pounds per square inch
0.313 inches minimum and 0.375 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7616103000
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-01-270-6737 RIVET,BLIND
chromate stem surface treated 755 single pounds per square inch shear strength 0.313" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 012706737
- NIIN Date
- 01/12/88
- Schedule B
- 7616103000
- Name Code
- 00864
- FIIG
- A040A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Availability for CR2162T5-6 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
CR2162T5-6 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
