CR2162T5-5

CR2162T55 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. CR2162T5-5 specification

Identification Code Color
The application of color or a series of colors for the expressed purpose of identifying the specific functional design and/or the system application of an item.

orange and yellow

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.451in. ⁓29/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.155in. and 0.159in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.282in. and 0.290in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

dry film

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.251in. and 0.312in.

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

SELF-Locking

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

375 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

755 single pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Heat Treatment
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

H-38 strain hardened locking ring

Heat Treatment
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

T-4 solution heat treated sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 2017 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 5056 locking ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 7075 stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-430 fed spec all material responses

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

chromate stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-A-8625 mil spec 1st treatment response sleeve or MIL-C-5541 mil spec 2nd treatment response sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-C-5541 mil spec single treatment response stem

Supplementary Features
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.

similar to NAS1399D5-5 nsn 5320-00-928-9908 except w/ trans lub 20204

Answers.

What material is the blind rivet made of ?

Aluminum alloy 7075 stem

What material is the blind rivet made of ?

Aluminum alloy 5056 locking ring

What material is the blind rivet made of ?

Aluminum alloy 2017 sleeve

What is the shear strength?

755 single pounds per square inch

What is the grip length?

0.251 inches minimum and 0.312 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for CR2162T5-5?

5320-01-270-6736

How is this classified for shipping?

Schedule B number: 7616103000
Aluminum rivets

What's the federal classification of CR2162T5-5?

FSC 5320 ⁓ Rivets

NSN 5320-01-270-6736 RIVET,BLIND

chromate stem surface treated 755 single pounds per square inch shear strength 0.251" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
012706736
NIIN Date
01/12/88
Schedule B
7616103000 
Name Code
00864
FIIG
A040A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
--
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Availability for CR2162T5-5 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

CR2162T5-5 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.