CCR244CS-4-07PR

CCR244CS407PR Blind Rivet
Home » Catalog » Fasteners (p. 1591) » Blind Rivets (p. 54) » Part Number CCR244CS-4-07PR

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. CCR244CS-4-07PR specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.718in. ⁓23/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.123in. and 0.128in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging high clinch shank

Head Major Diameter

0.196in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

F-22

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.376in. and 0.437in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

270 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

185 single pounds per square inch

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 305 stem

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5731 assn std single material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

astm A-493 assn std single material response stem

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec 1st treatment response sleeve and par 90 mfr ref 2nd treatment response sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec 1st treatment response stem and par 90 mfr ref 2nd treatment response stem

Answers.

What quantity is this sold in?

1EA

What material is the blind rivet made of ?

Steel comp 305 stem

What material is the blind rivet made of ?

Iron alloy 660 sleeve

What is the shear strength?

185 single pounds per square inch

What is the grip length?

0.376 inches minimum and 0.437 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for CCR244CS-4-07PR?

5320-01-490-5165

How is this classified for shipping?

Schedule B number: 7318230000
Rivets of iron or steel

What's the federal classification of CCR244CS-4-07PR?

FSC 5320 ⁓ Rivets

NSN 5320-01-490-5165 RIVET,BLIND

Used on F-22. passivate stem surface treated 185 single pounds per square inch shear strength 0.376" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
014905165
NIIN Date
09/28/01
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
QUP
1 
Historical Price
$7.15 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for CCR244CS-4-07PR A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

CCR244CS-4-07PR / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.