BB362-8-21

BB362821 Blind Rivet
Home » Catalog » Fasteners (p. 4829) » Blind Rivets (p. 188) » Part Number BB362-8-21

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. BB362-8-21 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3b

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

any acceptable

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.254in. and 0.257in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

blind rivet, nut and bolt (assembly)

Head Major Diameter

0.5066in.

Expansion Device
The device by which the item is expanded and set.

threaded sleeve

Fluid Tight Seal Type
Indicates the type of sealing element designed to prevent fluid passage.

sleeve

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

1.302in. and 1.322in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.164in. ⁓11/64"

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

125000 single pounds per square inch

Countersink Angle
The included angle of the countersink.

100.0 degrees

Seal Material
The chemical compound or mechanical mixture properties of which the seal is fabricated.

rubber synthetic

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 431 bolt

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 431 expander

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 305 sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-18732 mil spec single material response bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-18732 mil spec single material response expander

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-S-763 fed spec single material response sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium bolt

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium expander

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 1, cl 3 fed spec single treatment response bolt

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 1, cl 3 fed spec single treatment response expander

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, ty 1, cl 3 fed spec single treatment response sleeve

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjc

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjc

What material is the blind rivet made of ?

Steel comp 305 sleeve

What material is the blind rivet made of ?

Steel comp 431 expander

What material is the blind rivet made of ?

Steel comp 431 bolt

What is the shear strength?

125000 single pounds per square inch

What is the thread quantity per inch?

32

What is the grip length?

1.302 inches minimum and 1.322 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the thread direction?

Right-hand

What is the thread class?

3b

What is the NSN for BB362-8-21?

5320-01-040-8051

How is this classified for shipping?

Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel

What's the federal classification of BB362-8-21?

FSC 5320 ⁓ Rivets

NSN 5320-01-040-8051 RIVET,BLIND

unjc thread series cadmium sleeve surface treated 125000 single pounds per square inch shear strength 32 thread quantity per inch 1.302" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style right-hand 3b thread class

NIIN
010408051
NIIN Date
05/15/77
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
Item Weight
0.100lbs
Item Dimensions
--
QUP
1 
Historical Price
$47.73 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Department of The Navy 
  • - Department of The Air Force 
  • - Germany 

Availability for BB362-8-21 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
106510 RIVETS I/S PLAIN/GALVANIZED ETC 
UFC (universal freight code)
54760 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

BB362-8-21 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.