BAV8A4F

BAV8A4F Blind Rivet
Home » Catalog » Fasteners (p. 4837) » Blind Rivets (p. 188) » Part Number BAV8A4F

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. BAV8A4F specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

LEFT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.652in. ⁓21/32"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.274in. and 0.276in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

threaded SELF-Plugging shank w/sleeve

Head Major Diameter

0.463in. and 0.507in.

Expansion Device
The device by which the item is expanded and set.

threaded sleeve

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

grease film

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.220in. and 0.281in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

180000 pounds per square inch

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.190in. ⁓13/64"

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Heat Treatment
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.

annealed sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 304 sleeve

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 8740 bolt

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 8740 nut

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5639 assn std single material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6049 mil spec single material response bolt

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6049 mil spec single material response nut

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

NAS672 assn std single treatment response bolt

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

NAS672 assn std single treatment response nut

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416 ty 1 cl 3 fed spec single treatment response sleeve

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf

Answers.

What class is the thread series?

Unf

What material is the blind rivet made of ?

Steel comp 8740 nut

What material is the blind rivet made of ?

Steel comp 8740 bolt

What material is the blind rivet made of ?

Steel comp 304 sleeve

What is the grip length?

0.220 inches minimum and 0.281 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the thread direction?

Left-hand

What is the thread class?

3a

What is the NSN for BAV8A4F?

5320-01-038-4265

How is this classified for shipping?

Schedule B number: 7318230000
Rivets of iron or steel

What's the federal classification of BAV8A4F?

FSC 5320 ⁓ Rivets

NSN 5320-01-038-4265 RIVET,BLIND

unf thread series cadmium surface treated 0.220" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style left-hand 3a thread class

NIIN
010384265
NIIN Date
04/07/77
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Spain 

Availability for BAV8A4F A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

BAV8A4F / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.