Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. BAV10A10F specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.781in. ⁓25/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.325in. and 0.327in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
threaded SELF-Plugging shank w/sleeve
0.626in. and 0.635in.
The device by which the item is expanded and set.
threaded mandrel
A substance designed to provide a reduction of friction between the two surfaces in contact.
grease film
A measurement of the longest dimension of the grip,in distinction from width.
0.595in. and 0.656in.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
39.0 rockwell c and 43.0 rockwell c
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
14600 double pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
annealed
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 304 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8740 body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8740 stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5639 assn std single material response sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6049 mil spec single material response body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-6049 mil spec single material response stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium sleeve
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
nas 672 assn std single treatment response stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
NAS672 assn std single treatment response body
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, ty 1, cl 3 fed spec single treatment response sleeve
Answers.
Steel comp 8740 stem
Steel comp 8740 body
Steel comp 304 sleeve
14600 double pounds per square inch
0.595 inches minimum and 0.656 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
nmfc 013630
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-00-232-0820 RIVET,BLIND
cadmium stem surface treated 14600 double pounds per square inch shear strength 0.595" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 002320820
- NIIN Date
- 10/28/70
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $18.30 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3M82-10-10 | Cage 76301 |
Major End Users Countries and entities
- - Department of The Navy
- - Spain
Availability for BAV10A10F A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 013630 ALUM RIVETS
- UFC (universal freight code)
- 05720
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
BAV10A10F / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
