Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 97550A120 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.472in. ⁓31/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
brazier
A measurement from the bottom to the top of the head,in distinction from depth.
0.039in. ⁓3/64"
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.122in. and 0.126in. ⁓9/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.125in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
tubular
0.256in.
A measurement between specified points of the hole,in distinction from height.
0.125in.
The national stock number or the identification information of the end equipment for which the item is a part.
2355-01-539-3639; LAV-25A2 upgrades
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
562 pounds per square inch
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
450 single pounds per square inch
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
blind rivet, pop
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 316
Answers.
Steel comp 316
450 single pounds per square inch
0.122 inches minimum and 0.126 inches maximum
Brazier
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-01-567-0195 RIVET,BLIND
Used on 2355-01-539-3639;lav-25a2 upgrades. blind rivet, pop 450 single pounds per square inch shear strength 0.122" hole diameter brazier head style
- NIIN
- 015670195
- NIIN Date
- 09/16/08
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $5.18 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - U.s. Marine Corps
Availability for 97550A120 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
97550A120 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
