Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 73756-14-15 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.272in. and 1.302in. ⁓1-5/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.435in. and 0.437in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
SELF-Plugging mechanically locked stem
0.890in.
The device by which the item is expanded and set.
serrated STEM-Type w
A measurement of the longest dimension of the grip,in distinction from width.
0.906in. and 0.970in.
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
32.0 rockwell c body and 40.0 rockwell c body
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
48.0 rockwell c stem and 53.0 rockwell c stem
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
16700 single pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 4037 body or steel comp 4130 body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 8740 stem
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-W-405 fed spec 1st material response body or QQ-W-405 fed spec 2nd material response body or MIL-C-6758 mil spec 2nd material response body
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-W-405 fed spec single material response stem or MIL-S-6049 mil spec single material response stem
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, ty 1 or 2, cl 3 fed spec single treatment response stem
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, ty 2, cl 3 fed spec single treatment response body
The document designator of the specification or standard which established the item of supply.
96906-MS90353 government standard
Answers.
1EA
Steel comp 8740 stem
Steel comp 4037 body or steel comp 4130 body
16700 single pounds per square inch
0.906 inches minimum and 0.970 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
nmfc 061680
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-00-251-4966 RIVET,BLIND
cadmium stem surface treated 16700 single pounds per square inch shear strength 0.906" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 002514966
- NIIN Date
- 07/25/69
- Schedule B
- 7318230000
- Name Code
- 00864
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $191.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | VB90353-14-15 | Cage 92215 |
| 2. | B100-T14-15 | Cage 0HDW7 |
| 3. | MS90353-1415 | Cage 80205 |
| 4. | B100-T14-15 | Cage 17446 |
| 5. | MS90353-1415 | Cage 96906 |
| 6. | B100-T14-15 | Cage 29666 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
Availability for 73756-14-15 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
73756-14-15 / Rivet,blindWhat is the formal definition of this item?
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.
