3M1235D-4-2

3M1235D42 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 3M1235D-4-2 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.260in. ⁓17/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.124in. and 0.128in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.221in. and 0.229in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

F-15S

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.063in. and 0.125in.

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

agav

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 5056 locking ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 7075 stem

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 2017 sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

Q-A-430 fed spec 13th material response locking ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

Q-A-430 fed spec 13th material response sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize sleeve or chromate sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize stem or chromate stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-A-8625 mil spec 1st treatment response sleeve or MIL-C-5541 mil spec 2nd treatment response sleeve

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-A-8625 mil spec 1st treatment response stem or MIL-C-5541 mil spec 2nd treatment response stem

Answers.

What material is the blind rivet made of ?

Aluminum alloy 2017 sleeve

What material is the blind rivet made of ?

Aluminum alloy 7075 stem

What material is the blind rivet made of ?

Aluminum alloy 5056 locking ring

What is the grip length?

0.063 inches minimum and 0.125 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for 3M1235D-4-2?

5320-01-453-8479

How is this classified for shipping?

Schedule B number: 7616103000
nmfc 106510
Aluminum rivets

What's the federal classification of 3M1235D-4-2?

FSC 5320 ⁓ Rivets

NSN 5320-01-453-8479 RIVET,BLIND

Used on F-15S. anodize stem or chromate stem surface treated 0.063" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
014538479
NIIN Date
03/11/98
Schedule B
7616103000 
Name Code
00864
FIIG
A040A0
Item Weight
0.100lbs
Item Dimensions
--
QUP
 
Historical Price
$3.28 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. CR2172-4-2 Cage 11815
2. RV1301-4-2 Cage 53551

Major End Users Countries and entities

  • - Malaysia 
  • - Australia 
  • - Canada 

Availability for 3M1235D-4-2 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
106510 RIVETS I/S PLAIN/GALVANIZED ETC 
UFC (universal freight code)
54760 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

3M1235D-4-2 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.