0SMLS100-B06-04

0SMLS100B0604 Blind Rivet
Home » Catalog » Fasteners (p. 4099) » Blind Rivets (p. 160) » Part Number 0SMLS100-B06-04

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 0SMLS100-B06-04 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.412in. ⁓27/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.200in. and 0.204in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.349in. and 0.357in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.188in. and 0.250in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

715 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

1165 single pounds per square inch

Countersink Angle
The included angle of the countersink.

108.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 2024 stem

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 5056 locking ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 5056 sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-430 fed spec single material response locking ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-430 fed spec single material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-430 fed spec single material response stem

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize stem or chromate stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-A-8625 mil spec 1st treatment response stem or MIL-C-5541 mil spec 2nd treatment response stem

Answers.

What material is the blind rivet made of ?

Aluminum alloy 5056 sleeve

What material is the blind rivet made of ?

Aluminum alloy 5056 locking ring

What material is the blind rivet made of ?

Aluminum alloy 2024 stem

What is the shear strength?

1165 single pounds per square inch

What is the grip length?

0.188 inches minimum and 0.250 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for 0SMLS100-B06-04?

5320-01-168-1112

How is this classified for shipping?

Schedule B number: 7616103000
Aluminum rivets

What's the federal classification of 0SMLS100-B06-04?

FSC 5320 ⁓ Rivets

NSN 5320-01-168-1112 RIVET,BLIND

anodize stem or chromate stem surface treated 1165 single pounds per square inch shear strength 0.188" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
011681112
NIIN Date
12/13/83
Schedule B
7616103000 
Name Code
00864
FIIG
A040A0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - France 

Availability for 0SMLS100-B06-04 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

0SMLS100-B06-04 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.