0B100-T10-16

0B100T1016 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 0B100-T10-16 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.256in. ⁓1-17/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.326in. and 0.328in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

SELF-Plugging mechanically locked stem

Head Major Diameter

0.634in.

Expansion Device
The device by which the item is expanded and set.

serrated STEM-Type w

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.969in. and 1.032in.

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

18

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

32.0 rockwell c sleeve and 40.0 rockwell c sleeve

Hardness Rating
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.

48.0 rockwell c stem and 53.0 rockwell c stem

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.312in. ⁓5/16"

Countersink Angle
The included angle of the countersink.

99.0 degrees and 101.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std 1st material response mechanical lock or 66 fed std 2nd material response mechanical lock or 66 fed std 3rd material response mechanical lock or 66 fed std 4th material response mechanical lock or ams 5737 assn std 5th material response mechanical lock

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

astm A547 assn std 1st material response sleeve or astm A547 assn std 2nd material response sleeve or MIL-S-6758 mil spec 3rd material response sleeve

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-6049 mil spec single material response stem

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium mechanical lock and chromate mechanical lock

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium sleeve and chromate sleeve

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416 ty 1 cl 3 fed spec single treatment response stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416 ty 2 cl 2 fed spec single treatment response mechanical lock

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416 ty 2 cl 2 fed spec single treatment response sleeve

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unc

Answers.

What class is the thread series?

Unc

What material is the blind rivet made of ?

Steel

What is the thread quantity per inch?

18

What is the grip length?

0.969 inches minimum and 1.032 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the thread direction?

Right-hand

What is the thread class?

2a

What is the NSN for 0B100-T10-16?

5320-00-255-6266

How is this classified for shipping?

Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel

What's the federal classification of 0B100-T10-16?

FSC 5320 ⁓ Rivets

NSN 5320-00-255-6266 RIVET,BLIND

unc thread series cadmium stem surface treated 18 thread quantity per inch 0.969" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style right-hand 2a thread class

NIIN
002556266
NIIN Date
06/20/73
Schedule B
7318230000 
Name Code
00864
FIIG
A040A0
Item Weight
0.100lbs
Item Dimensions
--
QUP
 
Historical Price
$249.13 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Department of The Air Force 
  • - Department of The Navy 

Availability for 0B100-T10-16 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
50.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal and metal products, nos, (less than 35 feet) 
NMFC (national motor freight code)
106510 RIVETS I/S PLAIN/GALVANIZED ETC 
UFC (universal freight code)
54760 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

0B100-T10-16 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.