03A146V07-400

03A146V07400 Blind Rivet

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 03A146V07-400 specification

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.050in. ⁓1-1/16"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.2255in. and 0.2275in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

threaded SELF-Plugging shank w/sleeve

Head Major Diameter

0.373in. and 0.416in.

Expansion Device
The device by which the item is expanded and set.

threaded stem and knob STEM-Type k

Lubrication
A substance designed to provide a reduction of friction between the two surfaces in contact.

cetyl alcohol or carbo wax or paraffin wax

Grip Length
A measurement of the longest dimension of the grip,in distinction from width.

0.350in. and 0.400in.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

1600 pounds per square inch

Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.

5600 double pounds per square inch

Countersink Angle
The included angle of the countersink.

129.0 degrees and 131.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

powder blast top of head. drive nut, corrosion resistant coating, color grey.

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 stem

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 304 expander

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

titanium alloy uns R56400 body

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS4928 assn std single material response body or AMS4967 assn std single material response body

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS5639 assn std single material response expander

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS5731 assn std single material response stem or AMS5732 assn std single material response stem or AMS5737 assn std single material response stem

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate expander

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate stem

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response expander

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response stem

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

76823-03A146 manufacturers standard

Answers.

What quantity is this sold in?

1EA

What material is the blind rivet made of ?

Titanium alloy uns r56400 body

What material is the blind rivet made of ?

Steel comp 304 expander

What material is the blind rivet made of ?

Iron alloy 660 stem

What is the shear strength?

5600 double pounds per square inch

What is the grip length?

0.350 inches minimum and 0.400 inches maximum

What is the head style?

Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)

What is the NSN for 03A146V07-400?

5320-01-392-3412

How is this classified for shipping?

Schedule B number: 8108908000
nmfc 096320
Other wrought titanium

What's the federal classification of 03A146V07-400?

FSC 5320 ⁓ Rivets

NSN 5320-01-392-3412 RIVET,BLIND

passivate stem surface treated powder blast top of head. drive nut, corrosion resistant coating, color grey. 5600 double pounds per square inch shear strength 0.350" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style

NIIN
013923412
NIIN Date
06/28/94
Schedule B
8108908000 
Name Code
00864
FIIG
A040A0
Item Weight
0.100lbs
Item Dimensions
--
QUP
Historical Price
$37.55 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. MBF2113C-7-400 Cage 5M902
2. MBF2113C-7-400 Cage 98524

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for 03A146V07-400 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
77.5 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
096320 RIVETS I/S NICKEL PLATED BUFFED 
UFC (universal freight code)
50430 

Similar by Design Other rivets with similar characteristics

Nothing similar to this part number was found in our inventory

03A146V07-400 / Rivet,blindWhat is the formal definition of this item?

An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. it is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. it is designed to be installed or expanded from one side only. excludes nut, blind assembly.