Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 90402A827 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.375in. ⁓3/8"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.375in. ⁓3/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
undercut pan no. 2
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.373in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.157in. ⁓11/64"
The number of washers included on the item.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type ii
The national stock number or the identification information of the end equipment for which the item is a part.
5895-01-561-3705, satellite communication subsystem
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.
60.0 rockwell b
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.5
0.381in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.
flat external teeth
0.024in.
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
pan head phillips with lock WASHER-M10
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1050 primary washer or steel comp 1053 primary washer or steel comp 1054 primary washer or steel comp 1055 primary washer or steel comp 1059 primary washer or steel comp 1060 primary washer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
zinc
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
washer material C1050 to C1065 steel; phillips drive no 2
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m
Answers.
M
Steel
Steel comp 1050 primary washer or steel comp 1053 primary washer or steel comp 1054 primary washer or steel comp 1055 primary washer or steel comp 1059 primary washer or steel comp 1060 primary washer
32
Undercut pan no. 2
0.375 inches
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-588-7702 SCREW,ASSEMBLED WASHER
Used on 5895-01-561-3705, satellite communication subsystem. m thread series zinc surface treated pan head phillips with lock washer-M10 32 thread quantity per inch undercut pan no. 2 head style 0.375" thread length right-hand 2a thread class
- NIIN
- 015887702
- NIIN Date
- 10/01/10
- Schedule B
- 7318152000
- Name Code
- 06660
- FIIG
- A003B0
- QUP
- Historical Price
- $0.20 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for 90402A827 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
90402A827 / Screw,assembled washerWhat is the formal definition of this item?
A screw, (as modified) to which has been assembled one or more nonremovable washer(s).
