Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 11516665 specification
Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
19.20 mm and 20.80 mm
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat top elevator
Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
6.82 mm and 7.35 mm
Washer Quantity
The number of washers included on the item.
The number of washers included on the item.
1
Internal Drive Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
cross recess type ii
Nonmachine Thread Style
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.
gimlet point (type a, ab or ba)
Countersink Angle
The included angle of the countersink.
The included angle of the countersink.
90.0 degrees and 92.0 degrees
Primary Washer Outside Diameter
8.95 mm and 9.45 mm
Primary Washer Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.
flat
Primary Washer Material Thickness
0.35 mm and 0.50 mm
Nonmachine Nominal Thread Diameter
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.
4.2 mm
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 1008 primary washer or steel comp 1009 primary washer or steel comp 1009 primary washer
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel fastener
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
gm 6010-m, fscm 14862 mfr ref single material response fastener
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
gsae mil spec all material responses primary washer
Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
phosphate
Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
G-6047-M (240) , fscm 11862 mfr ref single treatment response
Answers.
What material is the assembled washer screw made of ?
Steel fastener
What material is the assembled washer screw made of ?
Steel comp 1008 primary washer or steel comp 1009 primary washer or steel comp 1009 primary washer
What is the head style?
Flat top elevator
What is the thread direction?
Right-hand
How is this classified for shipping?
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
What's the federal classification of 11516665?
FSC 5305 ⁓ Screws
NSN 5305-01-162-3961 SCREW,ASSEMBLED WASHER
phosphate surface treated flat top elevator head style right-hand
- NIIN
- 011623961
- NIIN Date
- 09/17/83
- Schedule B
- 7318152000
- Name Code
- 06660
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $1.23 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 12338093 | Cage 11862 |
| 2. | 11503537 | Cage 11862 |
| 3. | 12338093 | Cage 7X677 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Air Force
- - Lithuania
- - Greece
Availability for 11516665 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
11516665 / Screw,assembled washerWhat is the formal definition of this item?
A screw, (as modified) to which has been assembled one or more nonremovable washer(s).
