LD111-0059-1101

LD11100591101 Assembled Washer Bolt
Home » Catalog » Fasteners (p. 3440) » Assembled Washer Bolts (p. 7) » Part Number LD111-0059-1101

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. LD111-0059-1101 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.451in. and 0.511in. ⁓33/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.091in. and 1.121in. ⁓1-1/8"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.109in. and 0.640in. ⁓41/64"

Width Between Flats

0.367in. and 0.376in.

Washer Quantity
The number of washers included on the item.

1

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.190in. (UTS #10)

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

32

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

140000 pounds per square inch

Primary Washer Outside Diameter

0.420in.

Primary Washer Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.

finishing

Primary Washer Material Thickness

0.020in. and 0.030in.

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

also contains tab, corrosion resistant steel comp 301 per MIL-S-5059, passivated

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 fastener

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 primary washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303se STAND-Off

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5732 assn std single material response fastener or ams 5737 assn std single material response fastener

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

astm A582 assn std single material response primary washer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5059 mil spec single material response STAND-Off

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate fastener

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate primary washer

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate STAND-Off

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response fastener

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response primary washer

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response STAND-Off

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What material is the assembled washer bolt made of ?

Steel comp 303se stand-off

What material is the assembled washer bolt made of ?

Steel comp 301 primary washer

What material is the assembled washer bolt made of ?

Iron alloy 660 fastener

What is the thread quantity per inch?

32

What is the head style?

Hexagon

What is the thread length?

0.451 inches minimum and 0.511 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

3a

What is the NSN for LD111-0059-1101?

5306-01-268-8809

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of LD111-0059-1101?

FSC 5306 ⁓ Bolts

NSN 5306-01-268-8809 BOLT,ASSEMBLED WASHER

unjf thread series passivate stand-off surface treated also contains tab, corrosion resistant steel comp 301 per mil-s-5059, passivated 32 thread quantity per inch hexagon head style 0.451" thread length right-hand 3a thread class

NIIN
012688809
NIIN Date
12/08/87
Schedule B
7318152000 
Name Code
06659
FIIG
A003B0
Item Weight
0.400lbs
Item Dimensions
--
QUP
1 
Historical Price
$104.50 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Air Force 

Availability for LD111-0059-1101 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Bolts or nuts (iron or steel),(less than 35 feet) 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

LD111-0059-1101 / Bolt,assembled washerWhat is the formal definition of this item?

A bolt, machine on which has been assembled one or more nonremovable washers. see also screw, assembled washer.