5PTC1114V4-5

5PTC1114V45 Assembled Washer Bolt

Home » Catalog » Fasteners (p. 325) » Assembled Washer Bolts (p. 1) » Part Number 5PTC1114V4-5

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Serving our customers with quality and safety first.

AS9120 Certified
Audited supply chain
ITAR Registered
DDTC Registered
HAZMAT Certified
Customer service objectives
Every product 100% inspected

Datasheet. 5PTC1114V4-5 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

S3A

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.472in. ⁓31/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.096in. ⁓1-7/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat fillister

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.661in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.106in. ⁓7/64"

Washer Quantity
The number of washers included on the item.

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

F-22 raptor

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.2500in. ⁓1/4"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

S28

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

5790 pounds per square inch

Primary Washer Outside Diameter

0.661in.

Primary Washer Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.

flat

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

bolt, special (5PTV4206

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

washer bonded to bolt per 5PTPKL20; washer p/n is 5PTC1020R20; shank diameter 0.2490 min 0.2495 max; 32 microinch finish on shank diameter & threads all other 125 microinches; procuremement spec NAS4004

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

titanium alloy uns R56400

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

AMS4928 assn std single material response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What class is the thread series?

Unjf

What material is the assembled washer bolt made of ?

Titanium alloy uns r56400

What is the thread quantity per inch?

S28

What is the head style?

Flat fillister

What is the thread length?

0.472 inches

What is the thread direction?

Right-hand

What is the thread class?

S3a

What is the NSN for 5PTC1114V4-5?

5306-01-621-6187

How is this classified for shipping?

Schedule B number: 8108908000
nmfc 093486
Other wrought titanium

What's the federal classification of 5PTC1114V4-5?

FSC 5306 ⁓ Bolts

NSN 5306-01-621-6187 BOLT,ASSEMBLED WASHER

Used on f-22 raptor. unjf thread series washer bonded to bolt per 5PTPKL20; washer p/n is 5PTC1020R20; shank diameter 0.2490 min 0.2495 max; 32 microinch finish on shank diameter & threads all other 125 microinches; procuremement spec NAS4004 bolt, special (5PTV4206 S28 thread quantity per inch flat fillister head style 0.472" thread length right-hand S3a thread class

NIIN: 016216187
NIIN Date: 09/12/13
Schedule B: 8108908000
Name Code: 06659
FIIG: A003B0
DEMIL / ITAR: Uncontrolled item (Code )
Hazmat: No hazard information available from HMIRS.
MSDS: N/A
Precious Metals: --
Enviromental: N/A
Electrostatic ESD & EMI: No ESD or EMI sensitivity

Major End Users Countries and entities

- Department of The Air Force

Availability for 5PTC1114V4-5 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling: Other or no special handling required (sh)
LTL (less than a truck load rating): Rating variable
LCL (less than a car load rating): Unknown
Special Cargo: No special type of cargo code applicable
Air Freight (Minimum cargo door size required): Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Customs Requirement Classification: Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
Commodity (for shipments via water): Metal hardware
NMFC (national motor freight code): 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
UFC (universal freight code): 48950

Similar by Design Other bolts with similar characteristics

Nothing similar to this part number was found in our inventory

5PTC1114V4-5 / Bolt,assembled washerWhat is the formal definition of this item?

A bolt, machine on which has been assembled one or more nonremovable washers. see also screw, assembled washer.