13D0021-408 Assembled Washer Bolt

Datasheet. 13D0021-408 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.578in. ⁓37/64"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.078in. ⁓1-5/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.188in. and 0.203in. ⁓13/64"

Width Between Flats

0.554in. and 0.564in.

Washer Quantity
The number of washers included on the item.

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

C-17A spt eqmt

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.375in. ⁓3/8"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

160000 pounds per square inch

Primary Washer Outside Diameter

0.600in.

Primary Washer Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the primary washer.

finishing

Primary Washer Material Thickness

0.032in.

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

bolt, assembly - support equipment, cres

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

furnished with one shear bolt; 5306-01-398-1265, one spacer 5365-01-331-9515; one tab 4030-01-325-2632 and one washer 5310-01-335-2950

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

iron alloy 660 fastener

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 primary washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303se STAND-Off

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5731 assn std single material response fastener or ams 5737 assn std single material response fastener

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-S-5059, cond a mil spec single material response primary washer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-S-764, cond a fed spec single material response STAND-Off

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf

What material is the assembled washer bolt made of ?

Steel comp 303se stand-off

What material is the assembled washer bolt made of ?

Steel comp 301 primary washer

What material is the assembled washer bolt made of ?

Iron alloy 660 fastener

What is the thread quantity per inch?

What is the head style?

Hexagon

What is the thread length?

0.578 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

What is the NSN for 13D0021-408?

5306-01-539-5678

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of 13D0021-408?

FSC 5306 ⁓ Bolts

13D0021-408

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. 13D0021-408 specification

Answers.

NSN 5306-01-539-5678 BOLT,ASSEMBLED WASHER

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

Availability for 13D0021-408 A member of our team will provide you with a price and availability quote

Similar by Design Other bolts with similar characteristics

13D0021-408 / Bolt,assembled washerWhat is the formal definition of this item?