586R821H01

586R821H01 Assembled Sleeve Bolt

Home » Catalog » Fasteners (p. 2001) » Assembled Sleeve Bolts (p. 3) » Part Number 586R821H01

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Serving our customers with quality and safety first.

AS9120 Certified
Audited supply chain
ITAR Registered
DDTC Registered
HAZMAT Certified
Customer service objectives
Every product 100% inspected

Datasheet. 586R821H01 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.355in. and 0.395in. ⁓13/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.637in. and 1.667in. ⁓1-43/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

hexagon

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.090in. and 0.120in. ⁓1/8"

Width Between Flats

0.305in. and 0.312in.

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.190in. (UTS #10)

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.

175000 pounds per square inch

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

0.250-28UNF-2A threads on shoulder; threaded hex sleeve 0.312 in. across flats

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 secondary washer or steel comp 302 secondary washer or steel comp 316 secondary washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp XM-13 fastener

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting primary washer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting spring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting STAND-Off

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 5629 assn std single material response fastener

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

FED-S-Std 66 fed std all material responses primary washer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

FED-Std 66 fed std all material responses secondary washer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-S-763, 300 series fed spec all material responses STAND-Off or ams 5640, 300 series assn std single material response STAND-Off or astm A582, 300 series assn std all material responses STAND-Off

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-35 fed spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unf