Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 770115 specification
The length of a straight line which passes through the center of the body,and terminates at the circumference.
6.800in.
The national stock number or the identification information of the end equipment for which the item is a part.
f/1-18E/f
The length of a straight line which passes through the center of the wire,and terminates at the circumference.
0.028in.
A numeric value which represents the number of openings per lineal inch.
8.0
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
agav
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting screening
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5690 assn std single material response body or AMS5857 assn std single material response body
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
round (basically flat)
Answers.
1EA
Round (basically flat)
Steel corrosion resisting screening
Aluminum alloy body
Schedule B number: 8803300060
nmfc 069100
Other parts of airplanes or helicopters for use in military aircraft (excludes propellers, rotors, undercarriages, and parts the
FSC 2915 ⁓ Engine fuel system components, aircraft and missile prime movers
Note-fuel components specially designed for propulsion fuel systems, aircraft and missiles are to be placed in this fsc.
Excluding aircraft fuel tanks (fsc 1560); in-flight refueling system fuel components (fsc 1680). fuel system components not specifically designed for use with aircraft engines or missile prime-movers.
NSN 2915-01-496-1406 FILTER ELEMENT,FLUID
Used on f/1-18e/f. round (basically flat)
- NIIN
- 014961406
- NIIN Date
- 04/04/02
- Schedule B
- 8803300060
- Name Code
- 32624
- FIIG
- A24000
- QUP
- 1
- Historical Price
- $810.00 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 770115 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Motors and parts, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 069100 FILTERS:CARTRIDGES/ELEMENTS
- UFC (universal freight code)
- 21275
Similar by Design Other filter elements with similar characteristics
Nothing similar to this part number was found in our inventory
770115 / Filter element,fluidWhat is the formal definition of this item?
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.
