Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. FP24055P1 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.54in. and 0.56in. ⁓9/16"
A measurement of the longest straight line across a circular cross-sectional plane.
1.136in. and 1.137in. ⁓1-9/64"
The national stock number or the identification information of the end equipment for which the item is a part.
f/A-18 e/f
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
sleeve, oil nozzle
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
material polyimide A50GB0007; second end has flange with diameter 1.19in.; flange length is 0.55in.; flange has angle of 32 degrees max; internal diameter is 1.002in. max; heat stabilize at 155 degrees celsius max
Answers.
1EA
Schedule B number: 8803300060
nmfc 114730
Other parts of airplanes or helicopters for use in military aircraft (excludes propellers, rotors, undercarriages, and parts the
FSC 2915 ⁓ Engine fuel system components, aircraft and missile prime movers
Note-fuel components specially designed for propulsion fuel systems, aircraft and missiles are to be placed in this fsc.
Excluding aircraft fuel tanks (fsc 1560); in-flight refueling system fuel components (fsc 1680). fuel system components not specifically designed for use with aircraft engines or missile prime-movers.
NSN 2915-01-616-9970 SLEEVE,COOLING,FUEL INJECTION NO
Used on f/a-18 e/f. material polyimide A50GB0007; second end has flange with diameter 1.19"; flange length is 0.55"; flange has angle of 32 degrees max; internal diameter is 1.002" max; heat stabilize at 155 degrees celsius max sleeve, oil nozzle 0.54" overall length
- NIIN
- 016169970
- NIIN Date
- 03/06/13
- Schedule B
- 8803300060
- Name Code
- 61780
- FIIG
- A23900
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $187.50 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for FP24055P1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 85.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Motors and parts, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 114730 BARRELS/LINERS/SLEEVES I/C ENGINE
- UFC (universal freight code)
- 58790
Similar by Design Other sleeves with similar characteristics
Nothing similar to this part number was found in our inventory
FP24055P1 / Sleeve,cooling,fuel injection noWhat is the formal definition of this item?
An item designed to dissipate heat from a fuel injection nozzle. it may be provided with cooling fins or ribs and may be connected to the cooling system of an internal combustion engine.
