Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 82593-1 specification
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.
1.972in. and 1.992in.
The distance measured in a straight line from the bottom to the top of an item.
0.485in. and 0.515in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.015in. and 0.025in.
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.
0.180in. and 0.200in.
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
65.0 deg fahrenheit and 160.0 deg fahrenheit
The pressure at which an item is designed to operate.
300.0 pounds per square inch
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic polyethylene terephthalate and rubber fluorosilicone class fq
The type of media for which the item is designed.
air
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
special shaped
Answers.
1EA
Special shaped
Plastic polyethylene terephthalate and rubber fluorosilicone class fq
0.015 inches minimum and 0.025 inches maximum
Schedule B number: 8481909090
nmfc 051080
Parts of taps, cocks, valves and similar appliances
FSC 2915 ⁓ Engine fuel system components, aircraft and missile prime movers
Note-fuel components specially designed for propulsion fuel systems, aircraft and missiles are to be placed in this fsc.
Excluding aircraft fuel tanks (fsc 1560); in-flight refueling system fuel components (fsc 1680). fuel system components not specifically designed for use with aircraft engines or missile prime-movers.
NSN 2915-01-353-1360 DIAPHRAGM,ACTUATOR VALVE,SPECIAL
special shaped 0.180" center hole diameter 0.015" material thickness
- NIIN
- 013531360
- NIIN Date
- 02/05/92
- Schedule B
- 8481909090
- Name Code
- 40088
- FIIG
- A540B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $297.50 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 4-100-50-CDG-1 | Cage 01170 |
Major End Users Countries and entities
- - Department of The Air Force
- - Poland
Availability for 82593-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Pumps and parts, (machinery and parts),(less than 35 feet)
- NMFC (national motor freight code)
- 051080 FAUCETS,BIBCOCKS,GATES VALVES
- UFC (universal freight code)
- 29300
Similar by Design Other diaphragms with similar characteristics
Nothing similar to this part number was found in our inventory
82593-1 / Diaphragm,actuator valve,specialWhat is the formal definition of this item?
An item constructed of one or more layers of thin flexible material, either laminated or separated, designed to form a tight seal between the chambers of a valve, and to transmit pressure inducted motion to a valve disk either directly or through a mechanical linkage. the surface of the item must be formed or molded to have a beaded or rolled edge, ribs or any other raised surfaces. the item may contain bolt holes and/or center holes. excludes diaphra gm, valve, flat and gasket.
