Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 112492-006 specification
Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
piston
Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.875in. ⁓7/8"
Shaft Diameter
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.121in. single shaft
Shaft Length
A measurement of the longest dimension of the shaft,in distinction from width.
A measurement of the longest dimension of the shaft,in distinction from width.
0.125in. single shaft
Body Length
A measurement of the longest dimension of the body,in distinction from width.
A measurement of the longest dimension of the body,in distinction from width.
0.750in.
Overall Diameter
A measurement of the longest straight line across a circular cross-sectional plane.
A measurement of the longest straight line across a circular cross-sectional plane.
0.312in. ⁓5/16"
Temp Coefficient Of Capacitance Range In Ppm Per Deg Celsius
The minimum and maximum values of the permissible change in capacitance caused by a change in temperature,in parts per million per degree celsius.
The minimum and maximum values of the permissible change in capacitance caused by a change in temperature,in parts per million per degree celsius.
-50.0/+50.0 single section
Center To Center Distance Between Terminals Parallel To Length
The center to center distance between terminals parallel to the length of the item.
The center to center distance between terminals parallel to the length of the item.
0.703in.
Center To Center Distance Between Terminals Parallel To Diameter
The center to center distance between terminals parallel to the diameter of the item.
The center to center distance between terminals parallel to the diameter of the item.
0.235in.
Quality Factor At 25 Deg Celsius
The ratio of capacitive reactance to resistance,expressed at 25 degrees celsius.
The ratio of capacitive reactance to resistance,expressed at 25 degrees celsius.
500.0
Inclosure Type
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
encased
Adjustment Device Torque
The torque required for the adjustment device.
The torque required for the adjustment device.
1.000 INCH-Ounces and 8.000 INCH-Ounces
Insulation Dc Resistance At 25 Deg Celsius
Direct current resistance between two conductors that are separated by an insulating material,measured at 25 degrees celsius.
Direct current resistance between two conductors that are separated by an insulating material,measured at 25 degrees celsius.
1000.0 gigohms
Mounting Facility Type And Quantity
Indicates the type and number of facilities by which the item is mounted.
Indicates the type and number of facilities by which the item is mounted.
2 terminal
Nonderated Operating Temp
The temperature/s/ at which an item can function without voltage derating.
The temperature/s/ at which an item can function without voltage derating.
-55.0 deg celsius and 125.0 deg celsius
Shaft Type
Indicates the type of shaft included on the item.
Indicates the type of shaft included on the item.
round, slotted single shaft
Capacitance Range In Picofarads
The minimum and maximum values of the electrical capacitance measured between two specified points on the item,expressed in picofarads.
The minimum and maximum values of the electrical capacitance measured between two specified points on the item,expressed in picofarads.
+1.0/+14.0 single section
Nonderated Voltage Rating And Type
The highest potential and type that may be applied to the item,at the highest operating temperature permissible without voltage derating.
The highest potential and type that may be applied to the item,at the highest operating temperature permissible without voltage derating.
1000.0 dc continuous single section
Adjustment Device Drive Type And Quantity
Indicates the type and number of drive(s) provided for the adjustment device.
Indicates the type and number of drive(s) provided for the adjustment device.
1 shaft
Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
45413-112492-0006 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.
Indicates the type and number of terminals for providing electrical connection.
2 wire lead
Answers.
What quantity is this sold in?
1EA
How is this classified for shipping?
Schedule B number: 8532290040
nmfc 061400
Fixed capacitors
What's the federal classification of 112492-006?
FSC 5910 ⁓ Capacitors
Excluding semiconductor devices and associated hardware.
NSN 5910-00-484-5188 CAPACITOR,VARIABLE,GLASS DIELECT
0.875" overall length
- NIIN
- 004845188
- NIIN Date
- 09/17/69
- Schedule B
- 8532290040
- Name Code
- 00532
- FIIG
- A096A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $21.45 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MC621Y | Cage 51406 |
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
- - Turkey
Availability for 112492-006 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061400 CONDENSERS/PARTS NOI/CAPACITORS
- UFC (universal freight code)
- 34450
Similar by Design Other capacitors with similar characteristics
Nothing similar to this part number was found in our inventory
112492-006 / Capacitor,variable,glass dielectWhat is the formal definition of this item?
A capacitor whose capacitance value is controlled by a mechanical means which effects a continuous variation of its capacitance. it includes items consisting of two or more variable capacitors which are inseparable.
