Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. P450000500 specification
Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
Body Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
PLATE-Meshing
Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.500in. ⁓3-1/2"
Overall Height
The distance measured in a straight line from the bottom to the top of an item.
The distance measured in a straight line from the bottom to the top of an item.
2.000in.
Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
2.218in.
Shaft Diameter
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.265in. single shaft
Shaft Length
A measurement of the longest dimension of the shaft,in distinction from width.
A measurement of the longest dimension of the shaft,in distinction from width.
0.750in. single shaft
Body Length
A measurement of the longest dimension of the body,in distinction from width.
A measurement of the longest dimension of the body,in distinction from width.
2.000in.
Temp Coefficient Of Capacitance In Ppm Per Deg Celsius
A constant that represents the proportionate change in capacitance caused by a change in temperature,expressed in parts per million per degree celsius.
A constant that represents the proportionate change in capacitance caused by a change in temperature,expressed in parts per million per degree celsius.
40.0 all sections
Tolerance Of Temp Coefficient In Ppm Per Deg Celsius
The limits of permissible deviation of the temperature coefficient from the rated value,expressed in parts per million per degree celsius.
The limits of permissible deviation of the temperature coefficient from the rated value,expressed in parts per million per degree celsius.
-20.0/+10.0 all sections
Individual Section Quantity
The number of individual sections included in the item.
The number of individual sections included in the item.
2
Mounting Facility Screw Thread Series Designator
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.
unc
Inclosure Type
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
uninclosed
Plate Quantity
The number of plates included in the item.
The number of plates included in the item.
35
Tuning Characteristic
The tuning characteristic of the item.
The tuning characteristic of the item.
table all sections
Adjustment Device Rotation
The measurement of the mechanical motion of the adjustment device.
The measurement of the mechanical motion of the adjustment device.
240.0 degrees counterclockwise
Adjustment Device Torque
The torque required for the adjustment device.
The torque required for the adjustment device.
5.000 INCH-Ounces and 20.000 INCH-Ounces
Mounting Facility Type And Quantity
Indicates the type and number of facilities by which the item is mounted.
Indicates the type and number of facilities by which the item is mounted.
3 threaded hole
Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.
A designation that is used for the purpose of general identification of the thread.
0.138in. ⁓9/64"
Shaft Type
Indicates the type of shaft included on the item.
Indicates the type of shaft included on the item.
round single shaft
Capacitance Range In Picofarads
The minimum and maximum values of the electrical capacitance measured between two specified points on the item,expressed in picofarads.
The minimum and maximum values of the electrical capacitance measured between two specified points on the item,expressed in picofarads.
+7.0/+35.7 all sections
Nonderated Voltage Rating And Type
The highest potential and type that may be applied to the item,at the highest operating temperature permissible without voltage derating.
The highest potential and type that may be applied to the item,at the highest operating temperature permissible without voltage derating.
350.0 ac rms first section
Nonderated Voltage Rating And Type
The highest potential and type that may be applied to the item,at the highest operating temperature permissible without voltage derating.
The highest potential and type that may be applied to the item,at the highest operating temperature permissible without voltage derating.
500.0 ac rms second section
Adjustment Device Drive Type And Quantity
Indicates the type and number of drive(s) provided for the adjustment device.
Indicates the type and number of drive(s) provided for the adjustment device.
2 shaft
Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
16786-+450000500 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.
Indicates the type and number of terminals for providing electrical connection.
4 tab, solder lug
Answers.
What quantity is this sold in?
1EA
What is the overall width?
2.218 inches
What is the thread class?
2b
How is this classified for shipping?
Schedule B number: 8532290040
nmfc 061400
Fixed capacitors
What's the federal classification of P450000500?
FSC 5910 ⁓ Capacitors
Excluding semiconductor devices and associated hardware.
NSN 5910-00-688-5218 CAPACITOR,VARIABLE,AIR DIELECTRI
2.218" overall width 3.500" overall length 2b thread class
- NIIN
- 006885218
- NIIN Date
- 01/01/61
- Schedule B
- 8532290040
- Name Code
- 00531
- FIIG
- A096A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,198.13 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 540-7117-5 | Cage 71313 |
Major End Users Countries and entities
- - Department of The Navy
- - Brazil
- - Spain
- - Greece
- - Turkey
Availability for P450000500 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061400 CONDENSERS/PARTS NOI/CAPACITORS
- UFC (universal freight code)
- 34450
Similar by Design Other capacitors with similar characteristics
Nothing similar to this part number was found in our inventory
P450000500 / Capacitor,variable,air dielectriWhat is the formal definition of this item?
A capacitor whose capacitance value is controlled by a mechanical means which effects a continuous variation of its capacitance. it includes items consisting of two or more variable capacitors which are inseparable.
