Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M83504/01-029 specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
printed circuit
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.
dustproof
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.000in. ⁓1/64"
The distance measured in a straight line from the bottom to the top of an item.
0.480in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.380in.
A measurement of the longest dimension of the body,in distinction from width.
1.000in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
0.380in.
A measurement from the bottom to the top of the body,in distinction from depth.
0.240in. and 0.300in.
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
plastic
The number of actuators provided in the item for selection of switching positions.
9
The style designation indicating the configuration that most nearly corresponds to the appearance of the actuator.
rectangular
0.195in. and 0.205in.
A measurement taken at right angles to the length of the actuator,in distinction from thickness.
0.070in.
The relationship between the actuator position and the actuator action /maintained or momentary/.
up position maintained and down position maintained
The maximum voltage rating at which the item is designed to operate in an alternating current and/or direct current circuit,expressed in volts.
6.0 dc and 24.0 dc
The national stock number or the identification information of the end equipment for which the item is a part.
6920-01-142-2858 target holding set
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
hermetically sealed
The means of attaching the item.
printed circuit
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, both positions maintained 1st switch unit
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, both positions maintained 2nd switch unit
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, both positions maintained 3rd switch unit
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, both positions maintained 4th switch unit
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, both positions maintained 5th switch unit
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, both positions maintained 6th switch unit
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, both positions maintained 7th switch unit
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, both positions maintained 8th switch unit
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, both positions maintained 9th switch unit
The amount of current the contacts are rated to make or break at maximum rated voltage,with a specified load.
100.0 milliamperes resistive dc and 25.0 milliamperes resistive dc
An indication of the precious material and its location in the item.
contact siurfaces gold
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-S-83504 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Indicates the type and number of terminals for providing electrical connection.
18 printed circuit
The document designator of the specification or standard which established the item of supply.
81349-MIL-S-83504/1 government specification
Answers.
1EA
0.380 inches
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-273-7975 SWITCH,TOGGLE
Used on 6920-01-142-2858 target holding set. 0.380" overall width 1.000" overall length
- NIIN
- 012737975
- NIIN Date
- 03/01/88
- Schedule B
- 8536509065
- Name Code
- 00184
- FIIG
- A053A0
- Item Weight
- 0.100lbs
- Item Dimensions
- 20 X 20 X 20
- QUP
- 1
- Historical Price
- $20.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-S-83504/1 | Cage 81349 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - Canada
- - Republic of Korea
Availability for M83504/01-029 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
M83504/01-029 / Switch,toggleWhat is the formal definition of this item?
A switch which is externally actuated by a lever and whose contacts open and close with an instantaneous (snap) action; includes items having one or more momentary positions. includes switches (snap action) which use mercury to bridge contacts, and assemblages of complete switches (snap action) having common actuators. excludes switch, lever; switch, rotary; switch, knife; switch, sensitive; and switch, box.
