Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 400412-01 specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
bushing mount
The length of a straight line which passes through the center of the body,and terminates at the circumference.
0.970in. and 1.030in.
A measurement of the longest dimension of a bushing,in distinction from width.
0.455in. and 0.485in.
A measurement of the longest dimension of the body,in distinction from width.
1.750in.
The number of actuators provided in the item for selection of switching positions.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the actuator.
round
The length of a straight line which passes through the center of the actuator,and terminates at the circumference.
0.240in.
1.130in. and 1.190in.
The relationship between the actuator position and the actuator action /maintained or momentary/.
center position maintained and left position maintained and right position momentary
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
fully inclosed
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A designation that is used for the purpose of general identification of the thread.
0.469in. ⁓15/32"
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, double throw, one position momentary single switch unit
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
28v holding coil holds switch in themomentary position when coil is energised
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns
Indicates the type and number of terminals for providing electrical connection.
5 solder stud
Answers.
Uns
32
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-00-405-1899 SWITCH,TOGGLE
uns thread series 28v holding coil holds switch in themomentary position when coil is energised 32 thread quantity per inch
- NIIN
- 004051899
- NIIN Date
- 04/27/74
- Schedule B
- 8536509065
- Name Code
- 00184
- FIIG
- A053A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Portugal
- - Greece
Availability for 400412-01 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
400412-01 / Switch,toggleWhat is the formal definition of this item?
A switch which is externally actuated by a lever and whose contacts open and close with an instantaneous (snap) action; includes items having one or more momentary positions. includes switches (snap action) which use mercury to bridge contacts, and assemblages of complete switches (snap action) having common actuators. excludes switch, lever; switch, rotary; switch, knife; switch, sensitive; and switch, box.
