Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1TL1-5F specification
A measurement of the longest dimension of a bushing,in distinction from width.
0.470in.
A measurement of the longest dimension of the body,in distinction from width.
1.120in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
1.160in.
A measurement from the bottom to the top of the body,in distinction from depth.
0.620in.
1.020in.
The relationship between the actuator position and the actuator action /maintained or momentary/.
up position maintained and down position momentary and center position maintained
The relationship between the actuator position and the integral facility designed to prevent actuator movement.
up position locked in and down position no locking action and center position no locking action
The maximum voltage rating at which the item is designed to operate in an alternating current and/or direct current circuit,expressed in volts.
250.0 ac and 250.0 dc
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
A designation that is used for the purpose of general identification of the thread.
0.469in. ⁓15/32"
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, double throw, one position momentary, two positions maintained single switch unit
The amount of current the contacts are rated to make or break at maximum rated voltage,with a specified load.
500.000 milliamperes resistive dc and 6.000 amperes resistive ac
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns
Indicates the type and number of terminals for providing electrical connection.
3 screw
Answers.
1EA
Uns
32
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-00-687-2140 SWITCH,TOGGLE
uns thread series 32 thread quantity per inch
- NIIN
- 006872140
- NIIN Date
- 01/01/63
- Schedule B
- 8536509065
- Name Code
- 00184
- FIIG
- A053A0
- QUP
- 1
- Historical Price
- $21.68 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Brazil
- - Argentina
- - Malaysia
- - Canada
- - Germany
- - United Kingdom
- - Italy
- - Denmark
Availability for 1TL1-5F A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Radio parts and equipment, excluding tubes packed separately
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
1TL1-5F / Switch,toggleWhat is the formal definition of this item?
A switch which is externally actuated by a lever and whose contacts open and close with an instantaneous (snap) action; includes items having one or more momentary positions. includes switches (snap action) which use mercury to bridge contacts, and assemblages of complete switches (snap action) having common actuators. excludes switch, lever; switch, rotary; switch, knife; switch, sensitive; and switch, box.
