Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. SE-F140 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.000in. ⁓2-1/64"
The distance measured in a straight line from the bottom to the top of an item.
1.120in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
1.650in.
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.
0.170in.
A measurement from the bottom to the top of the body,in distinction from depth.
0.790in.
The distance between mounting facility centers.
1.560in. and 1.690in.
The longest distance between mounting centers parallel to the horizontal plane.
2.000in.
The shortest distance between mounting centers parallel to the horizontal plane.
1.550in.
The national stock number or the identification information of the end equipment for which the item is a part.
major/critical applications
Indicates the type of sensor or transducer used in the item to convert temperature changes to switch actuating force.
internal sensor
The radius of the circle in which the mounting facilities of an item are located.
0.930in.
The temperature at which the item operates.
104.0 deg fahrenheit and 338.0 deg fahrenheit
The means of attaching the item.
PLUG-In and slot
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.
increase
The general configuration and relative position of the facilities provided for mounting the item.
two position IN-Line
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 two circuit, both positions maintained
Indicates the type of terminal for providing electrical connection to the item.
tab, solder lug
The amount of current that the contacts are rated to make or break with a specified load.
25.0 amperes resistive load single voltage
The adjustability of the contact.
actuation point not adjustable
The rating of the stimulus required to actuate and/or deactuate the contact(s).
14.00 differential point degrees fahrenheit and 100.00 differential point degrees fahrenheit
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
120.0 ac at sea level first voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
240.0 ac at sea level second voltage
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
3/4in bimetallic disc thermostat
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
additional electrical ratings 120vac, 10fla, 60lra; 240vac, 5fla, 30lra, 100000 cycles; for the following APPLICATIONS-H.v.a.c, commercial food equipment, major appliances, medical/lab equipment
The cycles per second /hertz/ of the alternating current.
60.0 single voltage
The type of media for which the item is designed.
gas
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
disc w/flange
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
automatic reset; contacts open 120+/-9 and contacts close 140+/-5; normally open; contacts close on temperature rise; temperature sensitive snap action; thermally and electrically insulated; t series
Answers.
Disc w/flange
Schedule B number: 9032100000
Thermostats
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-566-0928 SWITCH,THERMOSTATIC
Used on major/critical applications. disc w/flange additional electrical ratings 120vac, 10fla, 60lra; 240vac, 5fla, 30lra, 100000 cycles; for the following applications-h.v.a.c, commercial food equipment, major appliances, medical/lab equipment 3/4in bimetallic disc thermostat 2.000" overall length
- NIIN
- 015660928
- NIIN Date
- 08/19/08
- Schedule B
- 9032100000
- Name Code
- 00451
- FIIG
- A048B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - France
- - Italy
Availability for SE-F140 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
SE-F140 / Switch,thermostaticWhat is the formal definition of this item?
A switch that is actuated by changes in ambient temperature. excludes circuit breaker; control, temperature (as modified); fuse (as modified); protector, thermal-overload, electrical motor; relay, thermal; and thermostat, flow control. see also control, temperature (as modified) and regulator, temperature (as modified).
