Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M24236/19-DKA specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a single threaded stud
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.054in. single threaded stud ⁓1/16"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.373in. ⁓3/8"
A measurement of the longest dimension of the body,in distinction from width.
0.170in.
The national stock number or the identification information of the end equipment for which the item is a part.
4920-01-121-9954 evacuation and fill station
Indicates the type of sensor or transducer used in the item to convert temperature changes to switch actuating force.
internal sensor
The shortest straight line between flats,perpendicular to the height.
0.281in. ⁓9/32"
The temperature at which the item operates.
-30.0 deg fahrenheit and 365.0 deg fahrenheit
The means of attaching the item.
threaded stud
Those features,not otherwise specified,which may be required for proper functioning of the item.
hermetically sealed case
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.
increase
A designation that is used for the purpose of general identification of the thread.
0.250in. single threaded stud ⁓1/4"
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, normally closed, momentary action
Indicates the type of terminal for providing electrical connection to the item.
tab, solder lug
The amount of current that the contacts are rated to make or break with a specified load.
0.5 amperes resistive load second voltage
The amount of current that the contacts are rated to make or break with a specified load.
1.0 amperes resistive load first voltage
The adjustability of the contact.
actuation point not adjustable
The rating of the stimulus required to actuate and/or deactuate the contact(s).
150.00 actuation point degrees fahrenheit and 30.00 differential point degrees fahrenheit
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
115.0 ac at sea level first voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
28.0 dc at sea level second voltage
The type of media for which the item is designed.
gas or liquid
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
plug
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-S-24236 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf single threaded stud
The document designator of the specification or standard which established the item of supply.
81349-MIL-S-24236/19 government specification
Answers.
Unf single threaded stud
Plug
0.054 inches minimum single threaded stud
2a single threaded stud
Schedule B number: 9032100000
Thermostats
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-221-8138 SWITCH,THERMOSTATIC
Used on 4920-01-121-9954 evacuation and fill station. unf single threaded stud thread series plug 0.373" overall length 0.054" single threaded stud thread length 2a single threaded stud thread class
- NIIN
- 012218138
- NIIN Date
- 12/04/85
- Schedule B
- 9032100000
- Name Code
- 00451
- FIIG
- A048B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-S-24236/19 | Cage 81349 |
| 2. | M24236/19-244 | Cage 81349 |
Major End Users Countries and entities
- - United Kingdom
Availability for M24236/19-DKA A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
M24236/19-DKA / Switch,thermostaticWhat is the formal definition of this item?
A switch that is actuated by changes in ambient temperature. excludes circuit breaker; control, temperature (as modified); fuse (as modified); protector, thermal-overload, electrical motor; relay, thermal; and thermostat, flow control. see also control, temperature (as modified) and regulator, temperature (as modified).
