Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M24236/1-EJJJF specification
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.
general PURPOSE-Nema type 1
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.160in. and 1.260in. ⁓1-17/64"
The distance measured in a straight line from the bottom to the top of an item.
0.638in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
0.640 in.
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.
0.140in.
A measurement from the bottom to the top of the body,in distinction from depth.
0.280in. and 0.395in.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.140in.
The distance between mounting facility centers.
0.937in.
The national stock number or the identification information of the end equipment for which the item is a part.
stinger training device
Indicates the type of sensor or transducer used in the item to convert temperature changes to switch actuating force.
internal sensor
The temperature at which the item operates.
-65.0 deg fahrenheit and 500.0 deg fahrenheit
The means of attaching the item.
bracket and slot and unthreaded hole
Those features,not otherwise specified,which may be required for proper functioning of the item.
hermetically sealed case
An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.
increase
The general configuration and relative position of the facilities provided for mounting the item.
two position IN-Line
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, normally closed, momentary action
Indicates the type of terminal for providing electrical connection to the item.
tab, solder lug
The amount of current that the contacts are rated to make or break with a specified load.
2.0 amperes resistive load first voltage and 1.0 amperes inductive load first voltage and 500.0 milliamperes lamp load first voltage
The amount of current that the contacts are rated to make or break with a specified load.
5.0 amperes resistive load second voltage and 2.5 amperes inductive load second voltage and 1.0 amperes lamp load second voltage
The amount of current that the contacts are rated to make or break with a specified load.
5.0 amperes resistive load third voltage and 2.5 amperes inductive load third voltage and 1.0 amperes lamp load third voltage
The adjustability of the contact.
deactuation point not adjustable and actuation point not adjustable
The rating of the stimulus required to actuate and/or deactuate the contact(s).
130.00 actuation point degrees fahrenheit and 110.00 deactuation point degrees fahrenheit
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
115.0 ac at sea level first voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
28.0 dc at altitude third voltage
The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.
28.0 dc at sea level second voltage
The cycles per second /hertz/ of the alternating current.
60.0 first voltage
The type of media for which the item is designed.
gas or liquid
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
disc w/flange
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-S-24236 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
The document designator of the specification or standard which established the item of supply.
81349-MIL-S-24236/1 government specification
Answers.
Disc w/flange
Schedule B number: 9032100000
Thermostats
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-528-3747 SWITCH,THERMOSTATIC
Used on stinger training device. disc w/flange 1.160" overall length
- NIIN
- 015283747
- NIIN Date
- 03/10/05
- Schedule B
- 9032100000
- Name Code
- 00451
- FIIG
- A048B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-S-24236/1 | Cage 81349 |
Major End Users Countries and entities
- - Greece
Availability for M24236/1-EJJJF A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
M24236/1-EJJJF / Switch,thermostaticWhat is the formal definition of this item?
A switch that is actuated by changes in ambient temperature. excludes circuit breaker; control, temperature (as modified); fuse (as modified); protector, thermal-overload, electrical motor; relay, thermal; and thermostat, flow control. see also control, temperature (as modified) and regulator, temperature (as modified).
