Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M3786/4-0366 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a single mounting facility
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.437in. single mounting facility ⁓7/16"
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.
explosion proof
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.591in. ⁓2-19/32"
0.250in. single actuator
0.216in. single actuator
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.250in. single actuator
A measurement of the longest dimension of the shaft,in distinction from width.
0.437in. single actuator
A measurement of the longest straight line across a circular cross-sectional plane.
1.000in. and 1.306in. ⁓1-5/16"
The linear measurement of the distance from the actuator centerline to the centerline of the nonturn device.
0.375in. at 3:00 o'clock
The number of individual sections included in the item.
3
Indicates the type of device used to prevent physical movement of the item on its mounting surface.
tab at 3:00 o'clock
The minimum and maximum limits of temperature at which the item is rated for operation.
-65.0/+85.0 deg celsius
The general configuration of the contacts of a switch that describes its basic switching structure.
NONPILE-Up symmetrical
The number of poles included in the item.
1 each section front
The number of positions to which the item may be actuated to energize electrical circuits.
5 each section rear
The means of attaching the item.
threaded bushing single mounting facility
A designation that is used for the purpose of general identification of the thread.
0.375in. single mounting facility ⁓3/8"
The voltage for which the contacts are rated,expressed in volts.
115.0 ac at sea level
The voltage for which the contacts are rated,expressed in volts.
2.0 dc at sea level
The angular distance of the shaft flat or slot from the point of reference.
216.0 degrees from nonturn device single actuator
Indicates the number of connections on a rotor segment that are front to rear surface connected.
1 each section
The number of positions to which the switch actuator may be indexed.
5 single actuator
Indicates the type of shaft included on the item.
round, flatted single actuator
Indicates the type of terminal for providing electrical connection to the item.
tab, solder lug
An indication of the switching action by the contacts of the item.
breaks before makes each section rear
The increments of angular rotation that the switch actuator moves between adjacent index positions.
36.0 degrees single actuator
The minimum and maximum amount of turning force required to rotate an actuator through the detent positions.
+0.500/+2.500 INCH-Pounds single actuator
Indicates the type of device included in the switch to limit the angular rotation of its actuator.
fixed stop single actuator
The amount of current that the contacts are rated to make or break with a specified load.
250.0 milliamperes resistive load dc at sea level and 100.0 milliamperes inductive load dc at sea level
The amount of current that the contacts are rated to make or break with a specified load.
75.0 milliamperes resistive load ac at sea level
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
tap, circular, bushing mount
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-S-3786 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef single mounting facility
The document designator of the specification or standard which established the item of supply.
81349-MIL-S-3786/4 government specification
Answers.
1EA
Unef single mounting facility
Tap, circular, bushing mount
0.437 inches single mounting facility
2a single mounting facility
Schedule B number: 8536509025
nmfc 061300
Switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-00-418-8809 SWITCH,ROTARY
unef single mounting facility thread series tap, circular, bushing mount 2.591" overall length 0.437" single mounting facility thread length 2a single mounting facility thread class
- NIIN
- 004188809
- NIIN Date
- 12/02/70
- Schedule B
- 8536509025
- Name Code
- 02134
- FIIG
- A052B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $56.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-DTL-3786/4 | Cage 81349 |
| 2. | 42M36-03-1-5N | Cage 81073 |
| 3. | MIL-S-3786/4 | Cage 81349 |
| 4. | MIL-DTL-3786/4 | Cage 81349 |
| 5. | 42M36-03-1-5N | Cage 81073 |
| 6. | MIL-S-3786/4 | Cage 81349 |
| 7. | MIL-DTL-3786/4 | Cage 81349 |
| 8. | 42M36-03-1-5N | Cage 81073 |
| 9. | MIL-S-3786/4 | Cage 81349 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - Germany
- - Republic of Korea
Availability for M3786/4-0366 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
M3786/4-0366 / Switch,rotaryWhat is the formal definition of this item?
A switch actuated by a definite angular rotation of the switch shaft about its axis. for items having rated actuation travel and pressure characteristics, see switch, sensitive. excludes relay, rotary; switch, stepping; and switch, telephone (as modified).
