Serving our customers with quality and safety first.
2a single mounting facility
0.417in. single mounting facility and 0.457in. single mounting facility ⁓15/32"
explosion proof
4.002in. and 4.640in. ⁓4-41/64"
0.230in. single actuator and 0.270in. single actuator
0.215in. single actuator and 0.221in. single actuator
0.248in. single actuator and 0.251in. single actuator
0.834in. single actuator and 0.914in. single actuator
1.100in. and 1.306in. ⁓1-5/16"
0.360in. at 3:00 o'clock and 0.390in. at 3:00 o'clock
8
tab at 3:00 o'clock
-65.0/+85.0 deg celsius
NONPILE-Up symmetrical
1 each section front
12 each section rear
threaded bushing single mounting facility
0.375in. single mounting facility ⁓3/8"
115.0 ac at sea level
28.0 dc at sea level
195.0 degrees from nonturn device single actuator
1 each section
12 single actuator
round, flatted single actuator
tab, solder lug
breaks before makes each section rear
30.0 degrees single actuator
+1.000/+4.500 INCH-Pounds single actuator
2.0 amperes resistive load ac at sea level and 1.0 amperes inductive load ac at sea level
1.0 amperes inductive load dc at sea level
tap, circular, bushing mount
81349-MIL-S-3786 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
unef single mounting facility
1EA
Unef single mounting facility
Tap, circular, bushing mount
0.417 inches minimum single mounting facility and 0.457 inches maximum single mounting facility
2a single mounting facility
Schedule B number: 8536509020
nmfc 061300
Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v
FSC 5930 ⁓ Switches
Excluding switchgear.
unef single mounting facility thread series tap, circular, bushing mount 4.002" overall length 0.417" single mounting facility thread length 2a single mounting facility thread class
1. | MIL-DTL-3786 | Cage 81349 |
2. | 12A4318-57 | Cage 81755 |
3. | C1051-1A8NC | Cage 81755 |
4. | 1905M8-12NC | Cage 91812 |
5. | 1905M8-12NP | Cage 91812 |
6. | 44A30-08-1-12N | Cage 81073 |
7. | 202-29200-11 | Cage 80378 |
8. | MIL-S-3786 | Cage 81349 |
9. | MS16109-30-8CN | Cage 96906 |
10. | MILS3786-4 | Cage 81349 |
11. | MIL-DTL-3786 | Cage 81349 |
12. | 12A4318-57 | Cage 81755 |
13. | C1051-1A8NC | Cage 81755 |
14. | 1905M8-12NC | Cage 91812 |
15. | 1905M8-12NP | Cage 91812 |
16. | 44A30-08-1-12N | Cage 81073 |
17. | 202-29200-11 | Cage 80378 |
18. | MIL-S-3786 | Cage 81349 |
19. | MS16109-30-8CN | Cage 96906 |
20. | MILS3786-4 | Cage 81349 |
Nothing similar to this part number was found in our inventory
A switch actuated by a definite angular rotation of the switch shaft about its axis. for items having rated actuation travel and pressure characteristics, see switch, sensitive. excludes relay, rotary; switch, stepping; and switch, telephone (as modified).