C10356 Rotary Switch

Datasheet. C10356 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2b single mounting facility

Hazardous Locations/environmental Protection
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.

explosion proof

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

3.375in. ⁓3-3/8"

Overall Height
The distance measured in a straight line from the bottom to the top of an item.

2.438in.

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

2.438in.

First Flat Length

0.750in. single actuator

Flat Height

0.219in. single actuator

Shaft Diameter
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

0.250in. single actuator

Shaft Length
A measurement of the longest dimension of the shaft,in distinction from width.

1.125in. single actuator

Individual Section Quantity
The number of individual sections included in the item.

Knob Manufacturer Code
The identifying code of the orginator that controls or manufacturers the knob.

82121

Knob Manufacturer Part Number
The identifying part number assigned to the knob.

Switch Contact Basic Design
The general configuration of the contacts of a switch that describes its basic switching structure.

NONPILE-Up symmetrical

Pole Quantity
The number of poles included in the item.

1 each section rear

Throw Quantity
The number of positions to which the item may be actuated to energize electrical circuits.

4 each section rear

Mounting Facility Circle Radius
The radius of the circle in which the mounting facilities of an item are located.

1.156in. single mounting facility

Mounting Method
The means of attaching the item.

bracket single mounting facility and threaded hole single mounting facility

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

actuator knob

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

24 single mounting facility

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.190in. single mounting facility ⁓13/64"

Contact Voltage Rating In Volts
The voltage for which the contacts are rated,expressed in volts.

120.0 ac at sea level

Mounting Facility Pattern
The general configuration and relative position of the facilities provided for mounting the item.

four position circular single mounting facility

Switch Actuator Indexing Position Quantity
The number of positions to which the switch actuator may be indexed.

4 single actuator

Shaft Type
Indicates the type of shaft included on the item.

round, flatted, threaded hole single actuator

Terminal Type
Indicates the type of terminal for providing electrical connection to the item.

tab w/screw

Contact Switching Action
An indication of the switching action by the contacts of the item.

breaks before makes each section rear

Switch Actuator Positioning Increment
The increments of angular rotation that the switch actuator moves between adjacent index positions.

90.0 degrees single actuator

Switch Actuator Stop Device Type
Indicates the type of device included in the switch to limit the angular rotation of its actuator.

fixed stop single actuator

Contact Load Current Rating
The amount of current that the contacts are rated to make or break with a specified load.

10.0 amperes resistive load ac at sea level

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

tap, circuit selector

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unc single mounting facility

Answers.

What class is the thread series?

Unc single mounting facility

What is the style?

Tap, circuit selector

What is the thread quantity per inch?

24 single mounting facility

What is the overall width?

2.438 inches

What is the thread class?

2b single mounting facility

What is the NSN for C10356?

5930-00-478-8058

How is this classified for shipping?

Schedule B number: 8536509025
Switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

What's the federal classification of C10356?

FSC 5930 ⁓ Switches

Excluding switchgear.

C10356

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. C10356 specification

Answers.

NSN 5930-00-478-8058 SWITCH,ROTARY

Availability for C10356 A member of our team will provide you with a price and availability quote

Similar by Design Other switchs with similar characteristics

C10356 / Switch,rotaryWhat is the formal definition of this item?