Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. B1041176ISSUEA specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a single mounting facility
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.234in. single mounting facility and 0.266in. single mounting facility ⁓17/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
4.452in. and 4.516in. ⁓4-33/64"
The distance measured in a straight line from the bottom to the top of an item.
2.312in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.969in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.234in. single actuator and 0.266in. single actuator
A measurement of the longest dimension of the shaft,in distinction from width.
0.859in. single actuator and 0.891in. single actuator
The linear measurement of the distance from the actuator centerline to the centerline of the nonturn device.
0.531in. at 10:00 o'clock
The number of individual sections included in the item.
5
Indicates the type of device used to prevent physical movement of the item on its mounting surface.
tab at 10:00 o'clock
The minimum and maximum limits of temperature at which the item is rated for operation.
-25.0/+85.0 deg celsius
The general configuration of the contacts of a switch that describes its basic switching structure.
NONPILE-Up symmetrical
The number of poles included in the item.
1 each section front
The number of poles included in the item.
1 each section rear
The number of positions to which the item may be actuated to energize electrical circuits.
7 each section front
The number of positions to which the item may be actuated to energize electrical circuits.
7 each section rear
The means of attaching the item.
threaded bushing single mounting facility
A designation that is used for the purpose of general identification of the thread.
0.375in. single mounting facility ⁓3/8"
The voltage for which the contacts are rated,expressed in volts.
110.0 ac at sea level
The voltage for which the contacts are rated,expressed in volts.
28.0 dc at sea level
The number of positions to which the switch actuator may be indexed.
7 single actuator
Indicates the type of shaft included on the item.
round, slotted single actuator
Indicates the type of terminal for providing electrical connection to the item.
tab, solder lug
An indication of the switching action by the contacts of the item.
breaks before makes each section rear
An indication of the switching action by the contacts of the item.
breaks before makes each section front
The increments of angular rotation that the switch actuator moves between adjacent index positions.
40.0 degrees single actuator
Indicates the type of device included in the switch to limit the angular rotation of its actuator.
fixed stop single actuator
The amount of current that the contacts are rated to make or break with a specified load.
2.0 amperes resistive load dc at sea level
The amount of current that the contacts are rated to make or break with a specified load.
1.0 amperes resistive load ac at sea level
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
all sect. rear have 2 dummy terminals
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
circular wafer, bushing mount
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
28528-B1041176 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef single mounting facility
Answers.
1EA
Unef single mounting facility
Circular wafer, bushing mount
1.969 inches
0.234 inches minimum single mounting facility and 0.266 inches maximum single mounting facility
2a single mounting facility
Schedule B number: 8536509020
nmfc 061300
Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-00-548-6594 SWITCH,ROTARY
unef single mounting facility thread series circular wafer, bushing mount all sect. rear have 2 dummy terminals 1.969" overall width 4.452" overall length 0.234" single mounting facility thread length 2a single mounting facility thread class
- NIIN
- 005486594
- NIIN Date
- 01/01/63
- Schedule B
- 8536509020
- Name Code
- 02134
- FIIG
- A052B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $86.18 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
Availability for B1041176ISSUEA A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
B1041176ISSUEA / Switch,rotaryWhat is the formal definition of this item?
A switch actuated by a definite angular rotation of the switch shaft about its axis. for items having rated actuation travel and pressure characteristics, see switch, sensitive. excludes relay, rotary; switch, stepping; and switch, telephone (as modified).
