Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. A15-1-8B24NCOPD specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a 1st mounting facility
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a 2nd mounting facility
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.500in. 2nd mounting facility ⁓2-1/64"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.375in. 1st mounting facility ⁓1/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
4.425in. ⁓4-7/16"
0.250in. single actuator
0.210in. single actuator
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.250in. single actuator
A measurement of the longest dimension of the shaft,in distinction from width.
0.375in. single actuator
A measurement of the longest straight line across a circular cross-sectional plane.
2.000in. ⁓2-1/64"
The linear measurement of the distance from the actuator centerline to the centerline of the nonturn device.
0.372in. at 12:00 o'clock
The number of individual sections included in the item.
8
Indicates the type of device used to prevent physical movement of the item on its mounting surface.
tab at 12:00 o'clock
The minimum and maximum limits of temperature at which the item is rated for operation.
-65.0/+125.0 deg celsius
The general configuration of the contacts of a switch that describes its basic switching structure.
NONPILE-Up symmetrical
The number of poles included in the item.
1 each section front
The number of positions to which the item may be actuated to energize electrical circuits.
24 each section rear
The means of attaching the item.
threaded bushing w/panel seal 1st mounting facility
The means of attaching the item.
threaded stud 2nd mounting facility
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 1st mounting facility
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
56 2nd mounting facility
A designation that is used for the purpose of general identification of the thread.
0.086in. 2nd mounting facility ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
0.469in. 1st mounting facility ⁓1/64"
The voltage for which the contacts are rated,expressed in volts.
115.0 ac at sea level
The voltage for which the contacts are rated,expressed in volts.
28.0 dc at sea level
Indicates the number of connections on a rotor segment that are front to rear surface connected.
1 each section
The number of positions to which the switch actuator may be indexed.
24 single actuator
Indicates the type of shaft included on the item.
round, flatted single actuator
Indicates the type of terminal for providing electrical connection to the item.
tab, solder lug
An indication of the switching action by the contacts of the item.
breaks before makes each section rear
The increments of angular rotation that the switch actuator moves between adjacent index positions.
15.0 degrees single actuator
The amount of current that the contacts are rated to make or break with a specified load.
3.0 amperes resistive load dc at sea level and 2.0 amperes inductive load dc at sea level
The amount of current that the contacts are rated to make or break with a specified load.
5.0 amperes resistive load ac at sea level
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
deck identification consists of letter for each deck a thru h located adjacent to common terminal
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
tap, circular, bushing mount
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc 2nd mounting facility
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns 1st mounting facility
Answers.
1EA
Uns 1st mounting facility
Unc 2nd mounting facility
Tap, circular, bushing mount
56 2nd mounting facility
32 1st mounting facility
0.375 inches 1st mounting facility
0.500 inches 2nd mounting facility
2a 2nd mounting facility
2a 1st mounting facility
Schedule B number: 8536509020
nmfc 061300
Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-267-8149 SWITCH,ROTARY
uns 1st mounting facility thread series tap, circular, bushing mount deck identification consists of letter for each deck a thru h located adjacent to common terminal 56 2nd mounting facility thread quantity per inch 4.425" overall length 0.375" 1st mounting facility thread length 2a 2nd mounting facility thread class
- NIIN
- 012678149
- NIIN Date
- 11/18/87
- Schedule B
- 8536509020
- Name Code
- 02134
- FIIG
- A052B0
- Item Weight
- 0.900lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,111.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Spain
Availability for A15-1-8B24NCOPD A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
A15-1-8B24NCOPD / Switch,rotaryWhat is the formal definition of this item?
A switch actuated by a definite angular rotation of the switch shaft about its axis. for items having rated actuation travel and pressure characteristics, see switch, sensitive. excludes relay, rotary; switch, stepping; and switch, telephone (as modified).
