Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 77C708609PT1 specification
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.312in. 1st mounting facility ⁓1/64"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.062in. 2nd mounting facility ⁓2-1/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.067in. and 3.129in. ⁓3-9/64"
The distance measured in a straight line from the bottom to the top of an item.
1.719in. and 1.781in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.719in. and 1.781in.
0.250in. single actuator
0.213in. single actuator and 0.223in. single actuator
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.248in. single actuator and 0.251in. single actuator
A measurement of the longest dimension of the shaft,in distinction from width.
0.688in. single actuator
The linear measurement of the distance from the actuator centerline to the centerline of the nonturn device.
0.531in. at 12:00 o'clock
The number of individual sections included in the item.
1
Indicates the type of device used to prevent physical movement of the item on its mounting surface.
tab at 12:00 o'clock
The longest distance between mounting centers parallel to the horizontal plane.
1.365in. single mounting facility and 1.385in. single mounting facility
The general configuration of the contacts of a switch that describes its basic switching structure.
NONPILE-Up symmetrical
The number of poles included in the item.
2 single section front
The number of positions to which the item may be actuated to energize electrical circuits.
10 single section front
The means of attaching the item.
threaded bushing 1st mounting facility
The means of attaching the item.
threaded hole 2nd mounting facility
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 1st mounting facility
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 2nd mounting facility
A designation that is used for the purpose of general identification of the thread.
0.138in. 2nd mounting facility ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
0.375in. 1st mounting facility ⁓1/64"
The voltage for which the contacts are rated,expressed in volts.
300.0 ac at sea level
The voltage for which the contacts are rated,expressed in volts.
30.0 dc at sea level
The angular distance of the shaft flat or slot from the point of reference.
150.0 degrees from nonturn device single actuator
The general configuration and relative position of the facilities provided for mounting the item.
two position IN-Line 2nd mounting facility
The number of positions to which the switch actuator may be indexed.
11 single actuator
Indicates the type of shaft included on the item.
round, flatted single actuator
Indicates the type of terminal for providing electrical connection to the item.
tab, solder lug
An indication of the switching action by the contacts of the item.
makes before breaks single section front
The increments of angular rotation that the switch actuator moves between adjacent index positions.
15.0 degrees single actuator
Indicates the type of device included in the switch to limit the angular rotation of its actuator.
fixed stop single actuator
The amount of current that the contacts are rated to make or break with a specified load.
300.0 milliamperes resistive load dc at sea level and 50.0 milliamperes inductive load dc at sea level
The amount of current that the contacts are rated to make or break with a specified load.
50.0 milliamperes resistive load ac at sea level
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
no detent mechanism - mtg hardware not supplied - shaft extends from rear 1.160 in, is parallel flatted w/ 3rd flat 0.250 in from end
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
square wafer, panel mount
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc 2nd mounting facility
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef 1st mounting facility
Answers.
1EA
Unef 1st mounting facility
Unc 2nd mounting facility
Square wafer, panel mount
32 2nd mounting facility
32 1st mounting facility
1.719 inches minimum and 1.781 inches maximum
0.062 inches 2nd mounting facility
0.312 inches 1st mounting facility
Schedule B number: 8536509020
nmfc 061300
Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-00-936-5940 SWITCH,ROTARY
unef 1st mounting facility thread series square wafer, panel mount no detent mechanism - mtg hardware not supplied - shaft extends from rear 1.160 in, is parallel flatted w/ 3rd flat 0.250 in from end 32 2nd mounting facility thread quantity per inch 1.719" overall width 3.067" overall length 0.062" 2nd mounting facility thread length
- NIIN
- 009365940
- NIIN Date
- 03/08/67
- Schedule B
- 8536509020
- Name Code
- 02134
- FIIG
- A052B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $206.05 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 2E06A11-1X1045 | Cage 54294 |
| 2. | 77C708609 | Cage 03538 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 77C708609PT1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
77C708609PT1 / Switch,rotaryWhat is the formal definition of this item?
A switch actuated by a definite angular rotation of the switch shaft about its axis. for items having rated actuation travel and pressure characteristics, see switch, sensitive. excludes relay, rotary; switch, stepping; and switch, telephone (as modified).
