Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 5M1665-0002 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a single mounting facility
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.430in. single mounting facility ⁓7/16"
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.
explosion proof
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
5.360in. ⁓5-3/8"
The distance measured in a straight line from the bottom to the top of an item.
1.250in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.250in.
0.250in. 2nd actuator
0.410in. 1st actuator
0.100in. 2nd actuator
0.210in. 1st actuator
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.125in. 2nd actuator
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.250in. 1st actuator
A measurement of the longest dimension of the shaft,in distinction from width.
0.430in. 1st actuator
A measurement of the longest dimension of the shaft,in distinction from width.
0.930in. 2nd actuator
The number of individual sections included in the item.
3
Indicates the type of device used to prevent physical movement of the item on its mounting surface.
slotted bushing at 2:30 o'clock
The minimum and maximum limits of temperature at which the item is rated for operation.
-65.0/+70.0 deg celsius
The national stock number or the identification information of the end equipment for which the item is a part.
envir system
The general configuration of the contacts of a switch that describes its basic switching structure.
NONPILE-Up symmetrical and NONPILE-Up nonsymmetrical
The number of poles included in the item.
1 1st section rear
The number of poles included in the item.
1 2nd section rear
The number of positions to which the item may be actuated to energize electrical circuits.
1 1st section rear
The number of positions to which the item may be actuated to energize electrical circuits.
3 2nd section rear
The means of attaching the item.
threaded bushing w/panel seal single mounting facility
Those features,not otherwise specified,which may be required for proper functioning of the item.
cam actuated and pull to turn
A designation that is used for the purpose of general identification of the thread.
0.375in. single mounting facility ⁓3/8"
The voltage for which the contacts are rated,expressed in volts.
28.0 dc at sea level
The angular distance of the shaft flat or slot from the point of reference.
337.5 degrees from nonturn device all actuators
The designation indicating the electrical configuration of a cam actuated switch including the number of switching poles or forms.
2 pole, double throw, double break/double make, permanent jumper, both positions maintained single switch 3rd section IN-Line
The number of positions to which the switch actuator may be indexed.
2 2nd actuator
The number of positions to which the switch actuator may be indexed.
3 1st actuator
Indicates the type of shaft included on the item.
round, flat, undercut 2nd actuator
Indicates the type of shaft included on the item.
round, hollowed, flatted 1st actuator
Indicates the type of terminal for providing electrical connection to the item.
tab, solder lug
An indication of the switching action by the contacts of the item.
breaks before makes 3rd section IN-Line
The increments of angular rotation that the switch actuator moves between adjacent index positions.
30.0 degrees 1st actuator
The minimum and maximum amount of turning force required to rotate an actuator through the detent positions.
+12.000/+64.000 INCH-Ounces single actuator
The amount of current that the contacts are rated to make or break with a specified load.
5.0 amperes resistive load dc at sea level and 2.0 amperes inductive load dc at sea level
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
with solenoid
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
tap, square frame
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef single mounting facility
Answers.
1EA
Unef single mounting facility
Tap, square frame
1.250 inches maximum
0.430 inches single mounting facility
2a single mounting facility
Schedule B number: 8536509020
nmfc 061300
Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-119-6186 SWITCH,ROTARY
Used on envir system. unef single mounting facility thread series tap, square frame with solenoid 1.250" overall width 5.360" overall length 0.430" single mounting facility thread length 2a single mounting facility thread class
- NIIN
- 011196186
- NIIN Date
- 09/27/81
- Schedule B
- 8536509020
- Name Code
- 02134
- FIIG
- A052B0
- Item Weight
- 0.300lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $2,853.08 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3600-3305 | Cage 31946 |
| 2. | 2498 | Cage 91812 |
| 3. | 10154321 | Cage A486G |
Major End Users Countries and entities
- - Department of The Navy
- - Finland
- - Spain
- - Malaysia
- - Australia
- - Canada
Availability for 5M1665-0002 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
5M1665-0002 / Switch,rotaryWhat is the formal definition of this item?
A switch actuated by a definite angular rotation of the switch shaft about its axis. for items having rated actuation travel and pressure characteristics, see switch, sensitive. excludes relay, rotary; switch, stepping; and switch, telephone (as modified).
