Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 559-11008-00 specification
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.
dustproof
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.500in. ⁓3-1/2"
The distance measured in a straight line from the bottom to the top of an item.
2.812in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
2.812in.
A measurement of the longest dimension of the shaft,in distinction from width.
1.125in. single actuator
The number of individual sections included in the item.
2
The identifying code of the orginator that controls or manufacturers the knob.
82121
The identifying part number assigned to the knob.
a
The longest distance between mounting centers parallel to the horizontal plane.
2.297in. single mounting facility
The longest distance between mounting centers parallel to the vertical plane.
2.297in. single mounting facility
The general configuration of the contacts of a switch that describes its basic switching structure.
NONPILE-Up symmetrical
The number of poles included in the item.
1 each section rear
The number of positions to which the item may be actuated to energize electrical circuits.
7 each section rear
The means of attaching the item.
threaded hole single mounting facility
Those features,not otherwise specified,which may be required for proper functioning of the item.
actuator knob
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24 single mounting facility
A designation that is used for the purpose of general identification of the thread.
0.190in. single mounting facility ⁓13/64"
The voltage for which the contacts are rated,expressed in volts.
125.0 highest dc voltage rating at sea level
The voltage for which the contacts are rated,expressed in volts.
125.0 lowest ac voltage rating at sea level
The voltage for which the contacts are rated,expressed in volts.
240.0 highest ac voltage rating at sea level
The voltage for which the contacts are rated,expressed in volts.
28.0 lowest dc voltage rating at sea level
The general configuration and relative position of the facilities provided for mounting the item.
four position rectangular single mounting facility
The number of positions to which the switch actuator may be indexed.
7 single actuator
Indicates the type of shaft included on the item.
rectangular/square, threaded hole single actuator
0.250in. single actuator
Indicates the type of terminal for providing electrical connection to the item.
tab w/screw
An indication of the switching action by the contacts of the item.
breaks before makes each section rear
The increments of angular rotation that the switch actuator moves between adjacent index positions.
45.0 degrees single actuator
Indicates the type of device included in the switch to limit the angular rotation of its actuator.
fixed stop single actuator
The amount of current that the contacts are rated to make or break with a specified load.
2.0 amperes resistive load highest dc voltage rating at sea level
The amount of current that the contacts are rated to make or break with a specified load.
10.0 amperes inductive load lowest ac voltage rating at sea level
The amount of current that the contacts are rated to make or break with a specified load.
10.0 amperes resistive load lowest dc voltage rating at sea level
The amount of current that the contacts are rated to make or break with a specified load.
5.0 amperes inductive load highest ac voltage rating at sea level
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
tap, circuit selector
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc single mounting facility
Answers.
Unc single mounting facility
Tap, circuit selector
24 single mounting facility
2.812 inches
Schedule B number: 8536509025
Switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-00-009-1056 SWITCH,ROTARY
unc single mounting facility thread series tap, circuit selector 24 single mounting facility thread quantity per inch 2.812" overall width 3.500" overall length
- NIIN
- 000091056
- NIIN Date
- 07/23/72
- Schedule B
- 8536509025
- Name Code
- 02134
- FIIG
- A052B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 21302NA | Cage 82121 |
Major End Users Countries and entities
- - Singapore
Availability for 559-11008-00 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
559-11008-00 / Switch,rotaryWhat is the formal definition of this item?
A switch actuated by a definite angular rotation of the switch shaft about its axis. for items having rated actuation travel and pressure characteristics, see switch, sensitive. excludes relay, rotary; switch, stepping; and switch, telephone (as modified).
