Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 260-1681-00 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a single mounting facility
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.375in. single mounting facility ⁓3/8"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.160in. ⁓2-11/64"
The distance measured in a straight line from the bottom to the top of an item.
1.000in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.890in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.250in. single actuator
A measurement of the longest dimension of the shaft,in distinction from width.
0.375in. single actuator
The linear measurement of the distance from the actuator centerline to the centerline of the nonturn device.
0.375in. at 3:00 o'clock
The number of individual sections included in the item.
2
Indicates the type of device used to prevent physical movement of the item on its mounting surface.
pin at 3:00 o'clock
The general configuration of the contacts of a switch that describes its basic switching structure.
NONPILE-Up symmetrical and NONPILE-Up nonsymmetrical
The number of poles included in the item.
1 2nd section rear
The number of positions to which the item may be actuated to energize electrical circuits.
3 2nd section rear
The means of attaching the item.
threaded bushing single mounting facility
A designation that is used for the purpose of general identification of the thread.
0.375in. single mounting facility ⁓3/8"
The voltage for which the contacts are rated,expressed in volts.
110.0 ac at sea level
The voltage for which the contacts are rated,expressed in volts.
28.0 dc at sea level
The number of positions to which the switch actuator may be indexed.
6 single actuator
Indicates the type of shaft included on the item.
round single actuator
Indicates the type of terminal for providing electrical connection to the item.
clip
An indication of the switching action by the contacts of the item.
makes before breaks 2nd section rear
The increments of angular rotation that the switch actuator moves between adjacent index positions.
45.0 degrees single actuator
The minimum and maximum amount of turning force required to rotate an actuator through the detent positions.
+15.000/+30.000 INCH-Ounces single actuator
Indicates the type of device included in the switch to limit the angular rotation of its actuator.
fixed stop single actuator
The amount of current that the contacts are rated to make or break with a specified load.
1.0 amperes resistive load dc at sea level
The amount of current that the contacts are rated to make or break with a specified load.
500.0 milliamperes resistive load ac at sea level
An indication of the precious material and its location in the item.
terminals silver
Identification of the precious material contained in the item.
silver
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
circular wafer, bushing mount
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef single mounting facility
Answers.
Unef single mounting facility
Circular wafer, bushing mount
0.890 inches
0.375 inches single mounting facility
2a single mounting facility
Schedule B number: 8536509025
Switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-065-0764 SWITCH,ROTARY
unef single mounting facility thread series circular wafer, bushing mount 0.890" overall width 2.160" overall length 0.375" single mounting facility thread length 2a single mounting facility thread class
- NIIN
- 010650764
- NIIN Date
- 09/09/78
- Schedule B
- 8536509025
- Name Code
- 02134
- FIIG
- A052B0
- Item Weight
- 0.000lbs
- Item Dimensions
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains silver
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 5-18271-411 | Cage 76854 |
| 2. | 5-18271-411 | Cage 76854 |
| 3. | 5-18271-411 | Cage 76854 |
| 4. | 5-18271-411 | Cage 76854 |
| 5. | 5-18271-411 | Cage 76854 |
Major End Users Countries and entities
- - National Aeronautics And Space Administration
Availability for 260-1681-00 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
260-1681-00 / Switch,rotaryWhat is the formal definition of this item?
A switch actuated by a definite angular rotation of the switch shaft about its axis. for items having rated actuation travel and pressure characteristics, see switch, sensitive. excludes relay, rotary; switch, stepping; and switch, telephone (as modified).
