Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 211MD21 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a 1st mounting facility
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b 2nd mounting facility
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.375in. 1st mounting facility ⁓1/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.438in. ⁓3-29/64"
The distance measured in a straight line from the bottom to the top of an item.
2.250in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
2.250in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.250in. single actuator
A measurement of the longest dimension of the shaft,in distinction from width.
0.563in. single actuator
The linear measurement of the distance from the actuator centerline to the centerline of the nonturn device.
0.531in. at 12:00 o'clock
The number of individual sections included in the item.
2
Indicates the type of device used to prevent physical movement of the item on its mounting surface.
tab at 12:00 o'clock
The longest distance between mounting centers parallel to the horizontal plane.
1.500in. 2nd mounting facility
The national stock number or the identification information of the end equipment for which the item is a part.
test set AN-D 49956
The general configuration of the contacts of a switch that describes its basic switching structure.
NONPILE-Up symmetrical
The number of poles included in the item.
1 each section rear
The number of positions to which the item may be actuated to energize electrical circuits.
21 each section rear
The means of attaching the item.
bracket 2nd mounting facility and threaded hole 2nd mounting facility
The means of attaching the item.
threaded bushing 1st mounting facility
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 2nd mounting facility
A designation that is used for the purpose of general identification of the thread.
0.164in. 2nd mounting facility ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
0.375in. 1st mounting facility ⁓1/64"
The voltage for which the contacts are rated,expressed in volts.
28.0 dc at sea level
The position of the actuator,with relation to the extremity of rotation,that is momentary (spring loaded).
clockwise single actuator and counterclockwise single actuator
The general configuration and relative position of the facilities provided for mounting the item.
two position IN-Line 2nd mounting facility
The number of positions to which the switch actuator may be indexed.
21 single actuator
Indicates the type of shaft included on the item.
round single actuator
Indicates the type of terminal for providing electrical connection to the item.
pin
An indication of the switching action by the contacts of the item.
makes before breaks each section rear
The increments of angular rotation that the switch actuator moves between adjacent index positions.
15.0 degrees single actuator
The minimum and maximum amount of turning force required to rotate an actuator through the detent positions.
+1.000/+50.000 INCH-Pounds single actuator
Indicates the type of device included in the switch to limit the angular rotation of its actuator.
fixed stop single actuator
The amount of current that the contacts are rated to make or break with a specified load.
2.0 amperes resistive load dc at sea level
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
square wafer, panel mount
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc 2nd mounting facility
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef 1st mounting facility
Answers.
1EA
Unef 1st mounting facility
Unc 2nd mounting facility
Square wafer, panel mount
32 2nd mounting facility
2.250 inches
0.375 inches 1st mounting facility
2b 2nd mounting facility
2a 1st mounting facility
Schedule B number: 8536509020
nmfc 061300
Switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-062-2485 SWITCH,ROTARY
Used on test set an-d 49956. unef 1st mounting facility thread series square wafer, panel mount 32 2nd mounting facility thread quantity per inch 2.250" overall width 3.438" overall length 0.375" 1st mounting facility thread length 2b 2nd mounting facility thread class
- NIIN
- 010622485
- NIIN Date
- 07/13/78
- Schedule B
- 8536509020
- Name Code
- 02134
- FIIG
- A052B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $173.38 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 211DM21 | Cage 58880 |
| 2. | 211DM21 | Cage 28057 |
| 3. | 211DM21 | Cage 58880 |
| 4. | 211DM21 | Cage 28057 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 211MD21 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
211MD21 / Switch,rotaryWhat is the formal definition of this item?
A switch actuated by a definite angular rotation of the switch shaft about its axis. for items having rated actuation travel and pressure characteristics, see switch, sensitive. excludes relay, rotary; switch, stepping; and switch, telephone (as modified).
