Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 271MR090P006 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.072in. ⁓1-5/64"
The distance measured in a straight line from the bottom to the top of an item.
1.469in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.722in.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
hermetically sealed
The pattern or arrangement that describes the mounting configuration of the item.
two 0.125 in. dia mtg holes spaced 0.875 in. c to c
The basic structure of the item.
NONPILE-Up
The value/s/ of direct current potential which must be applied to the item for operation,expressed in volts.
26.5
The specific number of contact terminals included.
6
The specific number of coil terminals included.
2
The specific number of common terminals included.
0
An indication of whether or not the reset facilities are provided.
not provided
The opposition that the coil offers to the flow of direct current.
325.0 ohms
The designation that identifies the schematic diagram of the contact configuration.
2pdt
The number of coil winding(s) provided.
1
An indication of the characteristic(s) of a winding.
single wound untapped
The measurement of the shaft rotation,expressed in degrees.
30.0
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
DROP-Out current shall be in excess of 6 ma at 25 deg c; mtg flange at terminal end of case
Answers.
1EA
0.722 inches maximum
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-760-1918 RELAY,ROTARY
drop-out current shall be in excess of 6 ma at 25 deg c; mtg flange at terminal end of case 0.722" overall width 1.072" overall length
- NIIN
- 007601918
- NIIN Date
- 01/01/60
- Schedule B
- Name Code
- 03890
- FIIG
- T142-S
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $53.55 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Navy
- - Italy
- - Turkey
Availability for 271MR090P006 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
271MR090P006 / Relay,rotaryWhat is the formal definition of this item?
A relay whose contact arm may rotate through 360 degrees but not in one operation. includes rotary relays which automatically reset. for an item having the dual functions of a switch and a relay assembled together on a common mounting, see relay-switch. excludes switch, rotary; switch, stepping; and switch, telephone (as modified).
