Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 602714 specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
uncased
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.200in. ⁓1-13/64"
The distance measured in a straight line from the bottom to the top of an item.
1.815in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.130in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
0.130in.
A measurement of the longest dimension of the body,in distinction from width.
0.880in.
A measure of the direct current power handling capability of an item.
50.0 watts
The maximum voltage rating at which the item is designed to operate in an alternating current and/or direct current circuit,expressed in volts.
42.0 dc
The national stock number or the identification information of the end equipment for which the item is a part.
6625-01-090-0625 calibrator, voltage
The means of attaching the item.
terminal
The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.
1 pole, single throw, normally open, momentary action single switch unit
The amount to which the actuating force must be reduced to permit the switch to become unactuated.
9.0 AMPERE-Turns and 56.0 AMPERE-Turns
The amount of force required to actuate the switch.
30.0 AMPERE-Turns and 80.0 AMPERE-Turns
The amount of current the contacts are rated to make or break at maximum rated voltage,with a specified load.
1.200 amperes resistive dc
Indicates the type and number of terminals for providing electrical connection.
2 wire lead
Answers.
1EA
0.130 inches maximum
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-313-4434 SWITCH,REED
Used on 6625-01-090-0625 calibrator,voltage. 0.130" overall width 1.200" overall length
- NIIN
- 013134434
- NIIN Date
- 01/09/90
- Schedule B
- 8536509065
- Name Code
- 28945
- FIIG
- A053A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $116.45 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 5103-602714 | Cage 89536 |
| 2. | V1101 | Cage 15636 |
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
- - France
Availability for 602714 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
602714 / Switch,reedWhat is the formal definition of this item?
An item actuated by an external magnetic field and having two or more contacts inclosed in a sealed capsule. do not use if switch has an actuator, such as a lever, push button, toggle, and the like. see switch (as modified). for items provided with an operating coil, use relay (as modified). it includes items in which a contact may be moved into a mercury pool by a magnetic field.
