Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS24234M19-20N specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
straight shape, external coupling strain relief
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.781in. ⁓1-25/32"
The distance measured in a straight line from the bottom to the top of an item.
1.219in. and 1.281in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.219in. and 1.281in.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
heat resistant and moisture proof and vibration resistant
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.120in.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.
0.967in. and 0.977in.
The distance between centerlines of mounting facilities parallel to the width of the item.
0.967in. and 0.977in.
The length of a straight line which passes through the center of the cable entrance,and terminates at the circumference.
0.561in.
0.375in.
Indicates the type of threaded device included on the item.
coupling facility
The number of mating ends provided with the item which are designed to accommodate another connector.
1
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
"1920, 19-20" single mating end
An indication of whether or not the contact(s) is removable.
removable single mating end all contact groupings
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.
10.0 single mating end all contact groupings
The maximum alternating current potential that may be applied continuously to the contact without damage,expressed in volts.
1250.0 single mating end 1st contact grouping
The maximum alternating current potential that may be applied continuously to the contact without damage,expressed in volts.
700.0 single mating end 2nd contact grouping
The maximum direct current potential that may be applied continuously to the contact without damage,expressed in volts.
500.0 single mating end 2nd contact grouping
The maximum direct current potential that may be applied continuously to the contact without damage,expressed in volts.
900.0 single mating end 1st contact grouping
The means used to prevent mismating or cross plugging of contacts.
keyway or multiple keyway
The amount of clockwise displacement of the indexing radius of the insert from normal position,expressed in degrees.
0.0
Indicates the type of shell included on the item.
solid
The means used to secure a connector to its mating counterpart.
bayonet pin
The means by which the connector cable is relieved of stress and strain.
cable clamp
A nominal measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.391in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
6
A designation that is used for the purpose of general identification of the thread.
1.188in. ⁓1-13/64"
Indicates the location of the terminal/s/ on the item.
back single mating end all contact groupings
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the contact surface(s) and cannot be wiped off.
gold single mating end all contact groupings and silver single mating end all contact groupings
The chemical compound or mechanical mixture properties of which the insert is fabricated.
plastic polyamide single mating end
Indicates the type of terminal for providing electrical connection to the item.
crimp single mating end all contact groupings
The chemical compound or mechanical mixture properties of which the shell is fabricated.
aluminum alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.
cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like that identifies the shell surface treatment material.
QQ-P-416, ty 2, cl 3 fed spec single treatment response
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the insert material.
MIL-P-17091 mil spec single material response single mating end
The number of contacts included with the item which provides electrical connection.
17 single mating end 2nd contact grouping
The number of contacts included with the item which provides electrical connection.
3 single mating end 1st contact grouping
Indicates the type of contact(s) included with the item.
round pin single mating end all contact groupings
An indication of the precious material and its location in the item.
contact surfaces gold and contact surfaces silver
An indication of the precious material contained in the item,and the amount per a measurement scale.
0.020 gold grains, troy and 0.020 silver grains, troy
Identification of the precious material contained in the item.
gold and silver
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-C-25955 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns
The document designator of the specification or standard which established the item of supply.
96906-MS24234 government standard
Answers.
1EA
Uns
6
1.219 inches minimum and 1.281 inches maximum
Right-hand
2b
Schedule B number: 8538907080
nmfc 061680
Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-00-823-0166 CONNECTOR,RECEPTACLE,ELECTRICAL
uns thread series 6 thread quantity per inch 1.219" overall width 1.781" overall length right-hand 2b thread class
- NIIN
- 008230166
- NIIN Date
- 01/01/60
- Schedule B
- 8538907080
- Name Code
- 15093
- FIIG
- A039B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $148.75 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-C-25955 | Cage 81349 |
Major End Users Countries and entities
- - Department of The Air Force
- - Canada
- - Greece
Availability for MS24234M19-20N A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other connectors with similar characteristics
Nothing similar to this part number was found in our inventory
MS24234M19-20N / Connector,receptacle,electricalWhat is the formal definition of this item?
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.
