Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M3655/13-0001 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a and 2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand and RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
straight shape, external coupling
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.625in. ⁓1-5/8"
A measurement of the longest straight line across a circular cross-sectional plane.
0.800in. ⁓13/16"
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
cold resistant and corrosion resistant and humidity resistant and heat resistant and salt water resistant and shock resistant and vibration resistant
0.796in. and 0.843in.
0.045in. and 0.160in.
Indicates the type of threaded device included on the item.
coupling facility and mounting bushing
The number of mating ends provided with the item which are designed to accommodate another connector.
1
An indication of whether or not the contact(s) is removable.
nonremovable single mating end all contact groupings
The maximum alternating current potential that may be applied continuously to the contact without damage,expressed in volts.
500.0 single mating end all contact groupings
The maximum frequency at which the contact is rated.
500.0 megahertz single mating end all contact groupings
The means used to prevent mismating or cross plugging of contacts.
contact
Indicates the type of shell included on the item.
solid
The means used to secure a connector to its mating counterpart.
externally threaded shell
The impedance for which the item is designed for maximum power transfer,expressed in ohms.
78.0 single mating end all contact groupings
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28 and 28
A designation that is used for the purpose of general identification of the thread.
0.437in. and 0.500in. ⁓1/2"
Indicates the location of the terminal/s/ on the item.
back single mating end all contact groupings
The chemical compound or mechanical mixture properties of which the contact is fabricated.
copper alloy single mating end all contact groupings
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the contact surface(s) and cannot be wiped off.
gold single mating end all contact groupings
The chemical compound or mechanical mixture properties of which the insert is fabricated.
plastic fluorocarbon single mating end
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the contact surface treatment material.
MIL-G-45204, type ii, class 2 mil spec single treatment response single mating end all contact groupings
Indicates the type of terminal for providing electrical connection to the item.
solder well single mating end all contact groupings
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the contact material.
QQ-C-530 fed spec single material response single mating end all contact groupings
The chemical compound or mechanical mixture properties of which the shell is fabricated.
steel corrosion resisting
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the shell material.
QQ-S-763 fed spec single material response
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the insert material.
L-P-403 fed spec single material response single mating end
The number of contacts included with the item which provides electrical connection.
1 single mating end 1st contact grouping
The number of contacts included with the item which provides electrical connection.
1 single mating end 2nd contact grouping
The physical configuration of the hole designed to accommodate a bushing.
round w/flat
Indicates the type of contact(s) included with the item.
coaxial pin single mating end 1st contact grouping
Indicates the type of contact(s) included with the item.
coaxial socket single mating end 2nd contact grouping
An indication of the precious material and its location in the item.
contact surfaces gold
An indication of the precious material contained in the item,and the amount per a measurement scale.
0.010 gold grains, troy
Identification of the precious material contained in the item.
gold
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-C-3655 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef and unef
The document designator of the specification or standard which established the item of supply.
81349-MIL-C-3655/13 government specification
Answers.
Unef and unef
28 and 28
Right-hand and right-hand
2a and 2a
Schedule B number: 8538907080
nmfc 061680
Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-01-222-2267 CONNECTOR,RECEPTACLE,ELECTRICAL
unef thread series 28 thread quantity per inch 1.625" overall length right-hand 2a thread class
- NIIN
- 012222267
- NIIN Date
- 12/09/85
- Schedule B
- 8538907080
- Name Code
- 15093
- FIIG
- A039B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $331.75 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-C-3655/13 | Cage 81349 |
| 2. | 5416-099-A591-1 | Cage 00795 |
| 3. | 5416099A591-001 | Cage 00795 |
| 4. | MIL-C-3655/13 | Cage 81349 |
| 5. | 5416-099-A591-1 | Cage 00795 |
| 6. | 5416099A591-001 | Cage 00795 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - Poland
- - Norway
Availability for M3655/13-0001 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other connectors with similar characteristics
Nothing similar to this part number was found in our inventory
M3655/13-0001 / Connector,receptacle,electricalWhat is the formal definition of this item?
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.
